Jump to content
SAU Community

Recommended Posts

Ok guys want this crap gonski! All in good condition. Pickup Items located in Liverpool area NSW Cheers

Rear spoiler $35 pic 1 pic 2 pic 3 pic 4

Rear spoiler in average condition. paint is fading on both corners. could do with a respray. one small chip on right side as can see in pics. wiring plug there, missing one or two bolts which shouldnt be a problem

2x Kuhmo Kh15 195/65/14 Cheap As $25 pic 1 pic 2 pic 3

Great for spares, about 50% tread left on them at a guess. One tyre has a nail in it, which can be removed i guess. I am not a professional so couldn't tell you 100%. Either way going cheap. Been in storage for a while just want them gone.

R32 Nissan skyline 3" exhaust turbo back twin tip $170 pic 1 pic 2 pic 3 pic 4

Turbo back exhaust removed off car want something different. 3" dump/front pipe through to cat and magnaflow twin tip muffler. Not to loud but has a nice deep growl, buyer will not be dissappointed. Direct bolt onto standard turbo. Cheapest upgrade you can do if you have stock exhaust. Selling cheap it's taking up space. Not the prettiest thing to look at but it does the job. Mid section pipe will need to be cut off on one of the ends and a new 3 bolt flange welded on. As i had it changed when i replaced my cat converter few years back.

Link to comment
https://www.sau.com.au/forums/topic/299894-r32-full-exhaust-and-rear-spoiler/
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...

Few more items added guys, still have the tyres and exhaust. Price drop on exhaust $150

2 X green label AFMS been in garage for ages were both working when replaced, one is missing the mesh. cannot gurantee working condition $30 each

afm 1

afm 2

afm second

afm second 1

1 pair of indicators orange type - both in good condition but both have broken mounts see pics - $40

indicators

indicators 2

1 pair of clear indicators bought off ebay so they have gone yellowish see pics. all plastics and mounts are good $30

clear indicators

clear 2

1 r32/r33 starter motor bosch brand new bought 2 years ago only trial fitted hence few scratch marks never used. should work fine

since its brand new but i cant gurantee it because i never used it. $100

starter motor

starter motor 2

starter motor 3

1 x r32 whiteline front strut brace brand new $120

Strut brace

strut brace 2

rb20 turbo + box full parts see pics. pulled off car at about 120,000kms was running good no smoke from what i remember. Very little shaft play

only run 10psi going cheap $160 note actuator and all parts except turbo are off a rb25

turbo

turbo 2

turbo 3

turbo 4

1 x nismo Fuel pressure regulator - bought off here a year ago never fitted should work fine $100

All items located in NSW Liverpool area and can post all except for exhaust just ask for a quote. Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...