Jump to content
SAU Community

! For Sale - My 2002 Mines R34 M Spec Nur Gtr !

R34GTRMSpecNUR
 Share

Recommended Posts

R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
Posted

Hi Guys,

Usual story - baby on the way, need bigger house, toys must go. My Nur is 1 of only 250 ever built. It was purchased brand new by a Kiwi who had it sent directly to Mines from factory for tuning. Including the original cost of the car, it's had NZ$350k spent on it and arguably sports the best of everything.

http://www.trademe.co.nz/Browse/Listing.aspx?id=259634078

Will be very sorry to see it go. I can be contacted via [email protected] or +64 21 227 4001

Cheers

Phil

JesseJames Apprentice

JesseJames

Posted
Posted (edited)
115k landed registered and complied in australia?

mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

Edited by JesseJames
sebastion Proficient

sebastion

Posted
Posted
That's correct guys - price is AUD$115k.

Thanks

Phil

thats an absolute bargin mate... wish we had the money... and also for those that may not know, he is selling the car with its original NUR motor (it has a new one in it), so you get a complete collector car and another engine...

good luck with it mate, should have no issues

arabian_drifter Community Regular

arabian_drifter

Posted
Posted
mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

wat did u just dribble man .

R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted
mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

I recently had an Aussie GTR enthusiast who was wanting to buy the Nur look into these costs and he concluded that all up it would be an additional AUD$20k.

Also, easy enough to minimise the duty obligations.

R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted
thats an absolute bargin mate... wish we had the money... and also for those that may not know, he is selling the car with its original NUR motor (it has a new one in it), so you get a complete collector car and another engine...

good luck with it mate, should have no issues

Thanks mate. Not only is it the rarest of the Nurs, but it's also been tuned by the legendary Mines company in Japan. For me, this just adds to its collectibility.

Considering the cost of a new R35, it is a bargin. All the money has been spent so the car is like new. Given its rare and collectable nature, it will likely appreciate over the years and will always appeal to the global car enthusiast market.

As you can see in the following link, a tuned GTR (R33 or R34) can still walk a new R35 around the track and my Nur has over 700hp.

Cheers

Phil

andz Mentor

andz

Posted
Posted
As you can see in the following link, a tuned GTR (R33 or R34) can still walk a new R35 around the track and my Nur has over 700hp.

prob a stock R35

*Xmas bump for a nice nur*

  • 2 weeks later...
R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted
prob a stock R35

*Xmas bump for a nice nur*

Thanks. For those interested, I took a few clips of my GTR recently. You can check them out here.

Enjoy

R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted

This was a once off - the only time I've ever launched it. 0-100 in under 4

http://www.youtube.com/watch?v=-HIBfsP1Fow

  • 1 month later...
R34GTRMSpecNUR Contributor

R34GTRMSpecNUR

Posted
  • Author
Posted

Hey guys - baby due any day now. Car has to go to make way for a new family wagon.

Have reduced price from AUD $115 to just $95K!! Just had oil changed also.

Anyone interested, please call on +64 21 227 4001

32godzilla Proficient

32godzilla

Posted
Posted

I think I'd rather chop an arm off than sell that! THE best 34 GTR I've ever seen (these 3 pics below have been my wallpaper(s) for about a year!)

gtr_nur_1.jpg

gtr_nur_2.jpg

gtr_nur_3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Watermouse
      Original window sticker?

      By Watermouse · Posted

      I got a full sheet set of OEM copied stickers to replace all the faded engine bay ones, great quality too.  Came from England. Someone like that should be able to to make u up what u want so long as u have a quality image to show them 🤷🏻‍♂️
    • myrbgivesmeheadaches
      RB25DET NEO Cylinder Head

      By myrbgivesmeheadaches · Posted

      Did this end up working? Did you take some pictures?
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
×
×
  • Create New...