Jump to content
SAU Community

Recommended Posts

Pics will be up tomorrow.

Location. North Shore Sydney.

Can meet half way if need be.

1. R33 Series One M-Spec Front Bar

Colour:Black

Condition:Good (Slight Rashes underneath,meh, normal)

$180 FIRM

2. R33 Stock Suspension

Condition: No Leaks, off 1994, 84,000km.

$100 ono

3. MTX 12" Sub in box

4500 Sledgehammer.

Condition: GOOD!

$200 FIRM

4. Jensen Mono Amp.

Exactly this

Condition:GOOD

$80 FIRM

Or Bundled $250 with Sub...Cheap as chips guys.

5. R33 Standard Turbo off Series One 1994.

Condition: GOOD no shaft play. Been boosted to 10psi when I got the car at 78,000km

$150 FIRM

6.Turbosmart Plumb-back BOV w/ R33 gts-t adaptor

Drilled hole underneath to make it into Dual-Port.

Cops don't see it.

$200 FIRM

Would like these all gone by 8th January as I'm goin overseas.

thanks

RJ

Edited by R 2 THE J
Link to comment
https://www.sau.com.au/forums/topic/301509-urgent-salesome-r33-parts-and-other/
Share on other sites

up u go..

BOV..pending sale with adaptor.

Prefer pick up guys.

Get em while they're hottt.

Front bar $150

Suspension $50

Sub AND Amp combo $200

Standard R33 Turbo $100

Front Bumper sold, Pending Payment.

BOV sold, Pending Payment.

Still got a few things left.

Come get 'em.

hey mate im real keen on suspension!! where you located? i will pick up this sunday if your keen.. pm me plz its easier

Items Pending Payment and Pick Up:

-Front Bumper

-Suspension

-R33 Turbo

-BOV

Still got:

-OEM R33 Series One Bonnet $200

-Sub and Amp combo $200

Need these both gone guys..

Make an offer...Anything TOO stupid will just be igonred.

PM EASIER!

Parts Sold So Far.

-BOV

-Sub and Amp

-Front Bumper

Turbo pending pick up

Suspension pending pick up

Still for Sale

-Series One Rear Wing in Black KH3

-Series One Front Bumper in Black KH3

PM for these parts!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...