Jump to content
SAU Community

Recommended Posts

Hey guys,

Just a quick question. I've been looking around at rims and am wondering how effective high quality tyres can be on narrow rims. I notice on websites like tempetyres, stgeorgetyres, etc that most of the rims are like 7.5-8.5" wide. A lot of the JDM wheels I like too are ridiculously expensive at the wider widths.

This doesn't phase me too much as a) the rims are cheaper and b) the tyres will be cheaper.

Will narrow high quality tyres out perform cheap to average wider tyres?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/
Share on other sites

wider tyre is more grip more stable not to mention how sh!t such narrow rims would look on a supra. decent rubber is not that expensive if you hunt around the kumho's are quite popular and i believe are very good ku36? someone else will have more info than me though.

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/#findComment-5009790
Share on other sites

wider tyre is more grip more stable not to mention how sh!t such narrow rims would look on a supra. decent rubber is not that expensive if you hunt around the kumho's are quite popular and i believe are very good ku36? someone else will have more info than me though.

I love my KU36's. wet I have had no issues and done prob 500kms in serious rain, more again in damp. In the dry they are great.

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/#findComment-5009837
Share on other sites

ok, you can get cheaper rims that are wide.... for a supra i'd look at lenso d2r....

as for tyres, i run a narrow tyre for my power figure, but i run nitto NT05's in 245 they are around $500 a corner retail (clearly i dont pay this), so not cheap, but grippy as all f**k...

with 300rwkw, low low low on stiff coilovers, camber, pineapples and a mech diff my 245's are insanely grippy

send me a pm kez and i can get you some good prices... :/

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/#findComment-5010371
Share on other sites

Will narrow high quality tyres out perform cheap to average wider tyres?

Yes. All else being equal, the width of the tyre is irrelevant to the size of the contact patch. All that changes is the shape. This can have a marginal effect on traction, but not to the same extent that a superior tyre type will.

When I went from 245 width all round RT215 S-Comps all round to 255 front / 285 rear width FK452s I noticed a big drop in grip. Even after mentally telling myself to go easier on the brakes, I'd get the tail to step out while trail braking. And I used to run 235 width R-Comps and, when hot, they had more grip again.

If you can afford to run a softer tyre that wears out more quickly by going to a narrower width (and even a lower wheel diameter), then on purely performance reasons I'd suggest it. But, aesthetically, it wouldn't look that crash hot. And, if you're talking about wheels you use every day, how they look will be a factor.

Link to comment
https://www.sau.com.au/forums/topic/301914-pizza-cutters/#findComment-5011494
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jax Tyres this Monday morning. Front lifted 15mm Back lifted 12mm Quote1, $175 per tyre + wheel alignment. Quote2, $660 inc wheel alignment. paid $298 for the lot.  
    • Finally have an update on this  Rack came in this week so I did a test fit. You do need the S chassis bushings since the rack is 5mm thinner than the R33 rack. The main issue I foresaw and ran into was one of the hardlines not lining up properly with there it's meant to on the rack. After some gentle coercing and bending very slightly, I managed to get it to fit without any kinks and keeping the hardline pretty much in all of the factory mounting positions. I did have to unbolt all of the soft mounts to move the line around so I could snake it out and bend it safely but it looks good to me for now. I'll update when the rack is fully bolted in and functioning.  
    • I hear this thread needs an update following its adventures last Wednesday!
    • What are you thinking makes a sequential shit to drive on the street? About the ONLY thing I can think of, is if you're wanting to be able to roll up to lights in third or second and pop it straight into neutral, or you want to come down two or three gears, say out of 5th and back to second, but they shift quick enough it doesn't really matter
    • I'm not a drag racing guy, but that was a good watch. Didn't Ibrahim's car have some cooch! But the big question is....WTF is with so many of them running without seatbelts!
×
×
  • Create New...