Jump to content
SAU Community

R33 Window Will Go Up, But Not Down. Sharing What I Found.


Recommended Posts

Hey i thought that i might as well share whats wrong with my car, and the faulty part i found. it probly been covered but might as well share it..

Okay, so my driver side window will go down, but refuses to go up, so i took the inner door panel off and had a look.

turns out its that little black box, tried unplugging and re plugging and checking wires. but nothing.. so i mess around a bit and found that if i gave the black box the littlest of taps while holing the down button the window would work.

so i assume a link or something is loose in box. so next time im at the wreckers ill get a new one :)

happend just after i got my sound system, must have shaken it to bits :D funny thing is the window works with bass :) or i just hold the button down and give the door a tap with my elbow and it works.. :P

hope this helps you :)

Nick. :D

post-44853-1262239175_thumb.jpg

Edited by Nick.

Hey buddy.... Yep mine was the same thing, I've gone through 3 relays (all second hand so I can't argue), they can range from $50-125ish depending on the wrecker and how well you know them lol

If you cut open that black box and use your finger to press the metal switches inside it, you'll find you can wind the window up/down whenever you want, so I took the circuit board out of the box, and routed the cable up through the switch panel (as a temporary fix) so that it was hanging down, and I could just press the metal switch to open or close the window.

It was like that for a couple of days as I couldn't get to the wreckers for a while. Just be careful of sparks :D

post-58284-1262245711_thumb.jpg

Edited by mosquitocoils
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
    • That's some really horrible design with the way it's cut/shaped! Is there much damage to the box that failed in? IE, new fork and you can go again, or is it a total rebuild again? Id be trying to build that piece from scratch, and getting some reliefs added in the corner to hopefully stop breakage, and then swapping boxes ASAP, and then doing the same to the currently good working box. I'm assuming hard shifts have not been friendly to it!
×
×
  • Create New...