Jump to content
SAU Community

Recommended Posts

got 2x pretty much brand new Defis looking to get rid of

white face 60mm

lights up green

comes with Defi cups with stands

mint condition

no sensors

1x exhaust temp

1x fuel pressure

$100 each

IMG_0753.jpg

1xset of Stitch Meshies looking to get rid of

all four have been machined and polished so no gutter rash

17x8 +5

17x9 +10

215/45 all round with bout 60% tread

fronts are 5 stud rears are multistud 4/5x114.3

$1300

IMG_0757.jpg

IMG_0756.jpg

IMG_0754.jpg

have an adaptor from t2 flange to t3 flange with gate port on it

or can be used the other way round to go from t3 to t2 flange

keep your stock manifold but have gate

$120

IMG_0747.jpg

- stock CA18DET injectors $30

- stock RB20DET injectors $50

- r32 manual tailshaft, good for manual conversion $50

- 2x r32 headlights, one GTR, one GTST $50 each

- 2x Cefiro rb20 afm's $20 each

- WEDS Professor OSER centre caps (all 4) $50

- rb20 CAS $20

- rb20 ignitor $20

- stock rb20 intake cam $5

- rb20 coilpack loom $20

Have a 60mm GReddy temp guage I'm looking to get rid of

perfect workng order

white face

lights up green

comes with all wiring and temp sensor

can be used for water or oil temp

will throw In an Omori water temp sensor holder thingy that goes in the radiator hose

$100

all items located in western burbs of melb

for pics sms 0431311585

Link to comment
https://www.sau.com.au/forums/topic/302273-vic-random-parts-defis-rb20-parts/
Share on other sites

  • 1 month later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...