Jump to content
SAU Community

Recommended Posts

My R33 had some random shocks ('Gear Climb' branded) and some very stiff RSR springs on when it came from Japan. They really need replacing as its horrible to drive at the moment.

Currently the front center to guard height is 310mm I think (almost tucking tyre) and the rear is around 330-340mm (I need to check these measurements). Also, the car has adjustable front upper arms.

I've been looking into Bilstein shocks, either the B6 or B8 models, plus a set of decent springs and then have the shocks valved to suit the springs. I'm about to send Heasmens steering an email to get a quote for shocks + valving, dust boots and bump stops.

Just a couple of things, I'm not sure what spring rates I should be looking at? The car is primarily my daily driver, but I will be doing some track days this year (nothing serious, just some practice days) and I want to keep the car reasonably low (I don't mind sacrificing a bit of performance for looks :P), maybe go up around 10-20mm in the front and bring the rear down 10-20mm (has too much rake for my liking at the moment). Can anyone suggest some springs that I should be looking at? Maybe even have some custom ones made up? Also, will the Bilsteins handle springs that short?

I understand the Bilsteins used in the Sydneykid group buy had spring perches that were adjustable using a circlip system. Is this a standard feature of the Bilstein gear? Obviously you have to maching extra circlip grooves.

Link to comment
https://www.sau.com.au/forums/topic/302389-r33-shockssprings/
Share on other sites

I'd rather not waste my money on 'coilovers' as such. All your paying for are some cheap shocks and wank factor height adjustment which I would set once and then never touch again.

I'm confident in saying $1500 spent on decent shocks and springs would out perform $1500 worth of off the shelf 'coilovers'

According to the Bilstein catalogue they dont do the B8's for r33's. It looks like B8's are just short stroke versions of B6's which would have been perfect. The B6's will only handle around a 30mm drop from stock, which for me is not enough. However, they do list a B8 for an R32 GTR...

Koni do a 'sport' range of shocks which come in a short option, so I'm going to try and find out a price/availability for those.

Eibach have a massive catalog of springs, but I need to know the dimensions of a stock spring so I can work out exactly what I need. Does anyone have dimensions (free length, # of coils, diameter and wire diameter) for stock springs?

I really don't want to end up buying coilovers :banana: I'd rather compromise on ride height I think.

Yeh, I may have to do that. Though I think that will make it quite expensive.

What about using R32 GTR B8's in the front and either find something from another car that has B8's avaliable or get a pair of B6's shortened...

Otherwise, I might just settle for 30mm lower than stock.

Thanks for the PM :D

I think I'm just going to use the B6's all round with a couple of extra circlip grooves to get the height I'm after with the RSR springs I currently have. If it's still too harsh/rough etc I'll switch to Whiteline or Eibach springs.

I think 30mm would be a fairly good drop. I bought the medium TEIN S.Tech springs, they are slightly stiffer than standard but they feel good to me but only dropped the car about 20mm (I don't have height adjustable suspension dammit!) Whiteline told me they have stopped making springs but when I rang them up they still had a couple left for R33's.

Technically, yes.

Most people associate 'coilovers' with the adjustable jap units so I used the same term instead of having to explain what I meant.

Anyway, I picked the new shocks up yesterday. Just gotta order some dust boots and bump stops then I can fit them up :(

  • 4 weeks later...

hey interesting conversation seeing as i maybe about to drop somewhere near 3 grand on a suspension my workshop recommends, tein monoflex.

im not sure what this is exactly, if its just coil overs but they are def adjustable and like prescott says i dont think i will be adjusting it very often as my car pretty much just does track and 'fun' work. going to get onto Matt at F+E mechanical repairs in Smithfield and ask for the most hardcore settings possible and probably just leave it like that. If that doesnt rock the baby to sleep on public roads nothing will....

anyway love any suggestions on brands, set ups, right now its stock and bodyroll is so bad sickbags should come as standard.

Matt said he was getting control arms and bushes in too, i imagine this is separate from the tein thing.

pat

Why is Matt changing your control arms? You also have not mentioned anything about sway bars which if your worried about body roll should be one of your top priorities. Maybe it is just me but I wouldn't like to spend 3 grand on something that I know nothing about.

I would do a bit of research before you potentially waste $3000...

My setup is going ok, though I killed the front bump stops within a week of putting them in. I'm thinking of going back to the stock bump stops (that are built in to the strut top) cos I dont want to kill the Bilsteins by bottoming them out too much.

Anyone know if R34 strut tops are the same as r33? (they look the same but I havent measured yet)...

I also have a few squeeks to track down and fix up :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...