Jump to content
SAU Community

Engine Hard To Start

levizzle

By levizzle,
in General Maintenance

 Share

Recommended Posts

levizzle Community Regular

levizzle

Posted
Posted (edited)

Ok I need some help diagnosing a problem with my R32 GTS-t. Recently it has become dodgy at starting and is becoming progressively worse. When I turn the key it kinda stutters and cranks a bit then stops and then is about to start and then doesnt but after maybe up to 10 secs it will crank over and start. Sometimes it barely does it and sometimes like to today it was really bad. Does anyone have an idea of where to start? First thought went to battery but if that was bad, wouldnt it have died by now, it has been going on for two weeks. Other ideas are starter motor, coilpacks, something else?

Also, probably related, engine almost stalls when I pull up to a stop and have the a/c on fan speed 3 or 4.

Any help would be appreciated.

Edited by levizzle
Link to comment
https://www.sau.com.au/forums/topic/302395-engine-hard-to-start/
Share on other sites
ashr32 Rising Star

ashr32

Posted
Posted
Ok I need some help diagnosing a problem with my R32 GTS-t. Recently it has become dodgy at starting and is becoming progressively worse. When I turn the key it kinda stutters and cranks a bit then stops and then is about to start and then doesnt but after maybe up to 10 secs it will crank over and start. Sometimes it barely does it and sometimes like to today it was really bad. Does anyone have an idea of where to start? First thought went to battery but if that was bad, wouldnt it have died by now, it has been going on for two weeks. Other ideas are starter motor, coilpacks, something else?

Also, probably related, engine almost stalls when I pull up to a stop and have the a/c on fan speed 3 or 4.

Any help would be appreciated.

I'd check fuel pressure with a gauge as i had a broken fuel pressure regulator that didnt hold pressure when the pump primed. this caused the car to only start if i cranked it for 10 or so times.

i quick test is to clamp the return line and try to start the car, see if it starts straight away

levizzle Community Regular

levizzle

Posted
  • Author
Posted

Which one is return, I am guessing the two black pipes coming from near the front of the extractors are the fuel lines. There is a top most one and lower one, which would be the return?

ashr32 Rising Star

ashr32

Posted
Posted
Which one is return, I am guessing the two black pipes coming from near the front of the extractors are the fuel lines. There is a top most one and lower one, which would be the return?

the return is the one without the fuel filter attached. so its after the rail and fuel pressure regulator

levizzle Community Regular

levizzle

Posted
  • Author
Posted

Thanks, havent tried it yet, as i just tested starting it up again and it started fine without doing a thing. Its weird because this morning it sounded the worst its been and just now it seemed almost ok.

  • 2 weeks later...
levizzle Community Regular

levizzle

Posted
  • Author
Posted

Well I have replaced oil and spark plugs just as regular maintenance because it was due. I also cleaned the battery terminals incase that was a problem. This all seemed to help a bit, but it still has its occassional fit. When it decides to be hard to start, it sounds kinda like a rattling, is this a problem or is it the motor just trying to crank. The battery is one of those non-serviceable batteries and it just has a green indicator to show if its ok and its changes red if it needs replacing apparently. Its still green, but could I test if it was the battery by connecting another car by jumper leads and then trying to start?

blind_elk Grand Master

blind_elk

Posted
Posted

By now you may well have flooded the engine. Try starting with WOT - this allows lots of air to help ignite the fuel lying around in the cylinders.

That doesn't address the root cause, though. I would start by getting the injectors professionally cleaned.

  • 2 weeks later...
levizzle Community Regular

levizzle

Posted
  • Author
Posted

Well i cleaned the aac valve which has helped some of my other issues and I noticed the engine starts a bit easier now. I dont know how long this will last but it seems to have helped at least. Seriously every skyline owner should clean their aac valve, it seems to fix alot of problems :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...