Jump to content
SAU Community

Recommended Posts

INTIMA STREET / RACE SERIES ULTRA HIGH PERFORMANCE BRAKE PADS TO SUIT MOST MODELS. (If its not listed below then let us know)!!

INTIMA2.jpg

SS Series info:

Application:

Street use in Standard, Performance & 4WD vehicles (Dust & Noise Free)

Description:

Making use of metal free, supreme organic materials, the SS-2100 Series provide excellent stopping power with reduced pedal effort from a cold start and will sustain this performance to temperatures up to 400°c.

Due to these materials used, dust and noise are not a problem and these pads are extremely kind to brake rotors.

Specifications:

Heat Range: Effective Braking 0°c - 400°c

Average µ: 0.55~0.6

AMECA CERT CDGE CODE: TBT SS21T GG

---------------------------------------------------------------------------------------------------------------------------------------

SR Series info:

Application:

Performance Street, Circuit Race & Drift Track Use (Low Dust & Hi Temp 700°c)

Description:

Intima's range of SR-6300 brake pads provide stable braking through the entire temperature range and have superior fade resistance. These pads are for the driver who wants confident braking on the street and on the track. The SR-6300 brake pad provides this confidence by having excellent braking capability up to 700°c. These pads also have a very low dust output and a 100% organic (NAO) formula.

Specifications:

Heat Range: Effective Braking 50°c - 700°c

Average µ: 0.4~0.5

AMECA CERT CDGE CODE: TBT SR63T GG

100% NAO Formula

---------------------------------------------------------------------------------------------------------------------------------------

SR-D Series info:

Application:

Competition, Circuit Race & Drift Track (Not designed for road use)

Description:

The Intima Type D are an exclusively formulated brake pad designed solely for the race track at a much more affordable price that many of our competitors products of the same performance.

The Type D pads have an incredible stopping power up to and exceeding 850°c and will take a large amount of punishment.

Specifications:

Heat Range: Effective Braking 250°c - <850°c

Average µ: 0.45~0.6

100% NAO Formula

---------------------------------------------------------------------------------------------------------------------------------------

FRONTS:

INTIMA SS STREET SERIES (FRONT) - $100.00 DELIVERED - Addtocart.gif

SUITS SKYLINE (89-01) FRONT CALIPERS (PAIR):

R32 GTST

R33 GTST

R34 GTT

INTIMA SR STREET RACE SERIES (FRONT) - $150.00 DELIVERED - Addtocart.gif

SUITS SKYLINE GTR (89-01) FRONT BREMBO CALIPERS (PAIR):

R32 GTR

R33 GTR

R34 GTR

INTIMA SR STREET RACE SERIES (FRONT) - $135.00 DELIVERED - Addtocart.gif

SUITS SKYLINE (89-01) FRONT CALIPERS (PAIR):

R32 GTST

R33 GTST

R34 GTT

INTIMA SR-D STREET RACE SERIES - TYPE D (FRONT) - $175.00 DELIVERED - Addtocart.gif

SUITS SKYLINE (89-01) FRONT CALIPERS (PAIR):

R32 GTST

R33 GTST

R34 GTT

INTIMA SR-D STREET RACE SERIES - TYPE D (FRONT) - $240.00 DELIVERED - Addtocart.gif

SUITS SKYLINE GTR (89-01) FRONT BREMBO CALIPERS (PAIR):

R32 GTR

R33 GTR

R34 GTR

---------------------------------------------------------------------------------------------------------------------------------------

REARS:

INTIMA SR STREET RACE SERIES (REAR) - $125.00 DELIVERED - Addtocart.gif

SUITS SKYLINE (89-01) REAR CALIPERS (PAIR):

R32 GTST

R33 GTST

R34 GTT

INTIMA SR STREET RACE SERIES (REAR) - $150.00 DELIVERED - Addtocart.gif

SUITS SKYLINE GTR (89-01) REAR BREMBO CALIPERS (PAIR):

R32 GTR

R33 GTR

R34 GTR

INTIMA SR-D STREET RACE SERIES - TYPE D (REAR) - $150.00 DELIVERED - Addtocart.gif

SUITS SKYLINE (89-01) REAR CALIPERS (PAIR):

R32 GTST

R33 GTST

R34 GTT

INTIMA SR-D STREET RACE SERIES - TYPE D (REAR) - $190.00 DELIVERED - Addtocart.gif

SUITS SKYLINE GTR (89-01) REAR BREMBO CALIPERS (PAIR):

R32 GTR

R33 GTR

R34 GTR

---------------------------------------------------------------------------------------------------------------------------------------

- The link next to each item will take you to our site where you can view pics & details and where you can purchase & pay via paypal with our secure online checkout system.

We also take direct deposit, bank check or money order. Please PM me or see here for details.

Please PM or contact us if you have any questions regarding these items.

Cheers,

Paul. :)

www.performance-wise.com

www.performance-wise.net

www.yellowjacketscoilpacks.com

Link to comment
https://www.sau.com.au/forums/topic/302501-intima-performance-brake-pads/
Share on other sites

  • 10 months later...
  • 1 year later...

Would any rears suit R33 GTS?

I have 3 different types available. The SS series, the SR series and the SR Type-D series.

http://performance-wise.com/page23.htm

:cheers:

From what i can see, there isnt a R33 GTS compatible one. The only one there that seems it might be is the R32 GTS (RB25DE) Rears, will those fit my R33 GTS RB25DE??

Sorry, I misread your first post.

I only have the rears to suit in the SS formula (Part number IN1144).

They are listed on this page - http://www.performance-wise.com/USERIMAGES/procart40.htm

I have a couple of sets in stock, ready to send out.

:cheers:

  • 1 year later...
  • 7 months later...
  • 2 months later...
  • 4 months later...
  • 3 weeks later...

Hi, il be after a set of intima ss pads to suit R34 Gtt rear soon, are they available and what is the cost?

Cheers

We have heaps available and the total price is $90.00 delivered courier.

:cheers:



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...