Jump to content
SAU Community

Recommended Posts

nah mate, rear brakes are different,

Are you running sindle or twin piston calipers rear mate?

twin piston are R32

Single piston, last time i needed a set i took one of my pads into the local brake joint and they matched it up in their book.they were maxima ones or something like that.

Front brakes are SR turbo ones

This is where different models become confusing. Was yours a 20DE or 20E originally ?

I know that with my Maxima and other Nissans, that they received discs at the rears if it was ABS model, if it was turbo, etc.

Australian model Maxima's have never been released with drum brakes, we've always had discs all round as standard here, but imports are different obviously.

Assuming the Cefiro was released in a similar fashion I'd say it depends on weather it was factory ABS, turbo, and/or how brakes were changed if it was converted to turbo later on.

+ As far as i Remember, didn't they all have single piston brakes all round anyway?

You said twin pistons the same as R32s ... even the turbo models had single piston, even at the fronts.

I'll have a look at my trusty sales brochures I got from Japan when I get home.

Autech Editions might have used different calipers to match their turbo's and shit, dunno.

just been through the same shit, silvia pads are waaay different, got a bendix book at work, the exact match in shape is the db1144 but after buying them i found out the pad material is too thick, wouldnt let the caliper sit back in place, so would ask for the the thinner version(if possible) of those pads and go from there

they were matched to skyline 33 gts rear pads, but obviously the got a wider caliper for thicker pads

go here http://www.bendix.com.au/ProductCatalogue.aspx and select

nissan

skyline

1993-1999; r33(import) non turbo

theres a listing for ceffys but only for fronts and theres no pic

just been through the same shit, silvia pads are waaay different, got a bendix book at work, the exact match in shape is the db1144 but after buying them i found out the pad material is too thick, wouldnt let the caliper sit back in place, so would ask for the the thinner version(if possible) of those pads and go from there

they were matched to skyline 33 gts rear pads, but obviously the got a wider caliper for thicker pads

go here http://www.bendix.com.au/ProductCatalogue.aspx and select

nissan

skyline

1993-1999; r33(import) non turbo

theres a listing for ceffys but only for fronts and theres no pic

I hope I'm not insulting your intelligence here, but did you make sure to spread the pistons in the caliper with one of those tools?

Otherwise, I'd say GTS (non turbo) skylines sound like the correct pad considering they have drum brakes.

Edited by daisu

:P my bad. Now I get ya. What's that got to do with pads though ?

Aren't the handbrake setups the same as R32s and its just the cable which is different ?

OP, if you have too much trouble finding a fitting pad, it's a good excuse to just upgrade to something bigger and more common.

The skyline/cefiro/laurel rear brakes have disc brakes with an internal drum (handbrake).

The S13/14/15 have regular disc brakes with cable operation on the calipers for the handbrake.

The difference is the size and shape of the caliper has to be different to accommodate the change in shape of the rotors.

If the caliper is a different size/shape then obviously the pads will be different too.

  • 6 months later...

What would be the best upgrade for the ceffy rear if I was going 5 stud and to retain the disk/drum combo? 33 or...

Also would the handbrake cable need to be changed?

Sorry to hijack the thread :)

Edited by surfbum64

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...