Jump to content
SAU Community

Recommended Posts

Lads,

Car bogs down from relatively low revs on WOT when coming on boost. Between 2-3500 revs. Its not really stuttering or surging, and not always. Just a dip/flat spot in power.

I havent replaced sparks or coilpacks. From reading threads coilpack failure seems to occur higher in the revs with a prominent stutter??

Mods.

FMIC return flow JJR

z32 NISTUNE

K&N FILTER

3inch exhaust

12psi

187rwkw

Link to comment
https://www.sau.com.au/forums/topic/304388-bogs-down/
Share on other sites

Maybe a leak, check all vac hoses, pipe clamps and the intercooler core for any small pinholes. If it's fine under cold wather conditions and losing boost response under warmer conditions (besides the fact it is warmer and oyu will lose a little power anyway) then a leak it may be.

Link to comment
https://www.sau.com.au/forums/topic/304388-bogs-down/#findComment-5041962
Share on other sites

Has it always been that way? What changed since it started happening? IIRC the z32 Nistune into R33 needs some magic (different TPSes?)

Yeah since ive added to EBC and Nistune. I rarely ever load it up like that so ive never noticed it too much before. Actually noticed it as a passenger for the first time.

Yes it has different tps being a z32 ecu and this causes a stutter on/off throttle....

Its hard to describe the fault without driving it. Ill replace sparks and coilpacks and see what happens. getting turbo highflowed soon so ill probably need to do that anyhow...

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/304388-bogs-down/#findComment-5042739
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...