Jaycar Iebc With Low Impedance Injectors

[sonoramicommando]

I posted on the stagea forum but that might not have been the best place to ask (although it had 51 page Jaycar IEBC thread going there).

Basically I upgraded to 440cc low impedance peak hold injectors on my R32 RB25DE+t and need some help for fitting of peak hold adaptor - I don't fully understand "how it works" part of the Jaycar kit instruction, I'm afraid..

Jaycar instruction says the 0.1 ohm 5W resistor needs to be spliced in between +12V feed to an injector and +V side of the injector plug.

Does it mean that the resisor need to be fitted before injector resistor pack? After resistor pack, it will see somewhat less than +12V (resistor pack for injector: 6 ohms & injector impedance: 3 ohms), no?

Thanks in advance,

Cheers,

Sam