Jump to content
SAU Community

Recommended Posts

Used Performance Parts

100mm thick FMIC to suit GTR $300

RB26dett spun bearing

Comes with intake plenum, Cam covers, timing belt covers etc

Price for entire motor without turbo, exhaust manifolds, spark plug cover, and awd sump (rwd sump supplied)

$1400 Firm

$200 turbos (no manifolds)

$200 sump

Brand NEW

N1 Oil pump $400

only opened the box to look at it, never installed

R33 GTST stock parts

2x Dump pipe $10 each

Front pipe $10

2x Exhaust manifold $40 each

Intake manifold (corrosion on radiator hose pipe) $10

Damaged Thermo Free

Power Steering bottle $10

SMIC with piping $40

Washer bottle $10

Radiator overflow bottle $10

R33 front pair of suspension (pit use) $20

Pair of indicator lights (clear) $20

R33 cat back exhaust (tiny hole in muffler and surface rust) $50

TurboSmart BOV Type 2 $80

Tcc Tech BOV Type 3 $50

R32 GTR stock turbos $200

R32 GTR boost solenoid $50

6x Stock Rb26 rods $200

6x Stock rb25 rods $100

RB30 head (SOHC) comes with intake and exhaust manifolds $100

PM me with any questions

Link to comment
https://www.sau.com.au/forums/topic/304738-gtr-parts-and-gtst-parts/
Share on other sites

hi guys my names christine and i just bought an r32 gtst for my boyfriend and im curious do the front seats adjust so that the winged parts move out more like in a supra and other sports cars? or will i have to get new front seats, as my boyfriend is quite a big boy, and if so can someone tell me what seats to put it in (they dont have to be anything flashy just comfortable)

thanx =]

hi guys my names christine and i just bought an r32 gtst for my boyfriend and im curious do the front seats adjust so that the winged parts move out more like in a supra and other sports cars? or will i have to get new front seats, as my boyfriend is quite a big boy, and if so can someone tell me what seats to put it in (they dont have to be anything flashy just comfortable)

thanx =]

lol how is this relevant to this topic? hehe

Edited by 8znR33

If you are talking about the boulsters, I am 99% certain they aren't adjustable in any way.

Sorry to hi-jack :S just trying to answer the question.

Free bump, good luck!

Hi im interested in the RB26 engine,

I'm really after a complete head and inlet manifold. The oil pump would be good also but don't need the block.

Where are you located?

Can you email me some pics? [email protected]

Cheers,

Darren.

What brand is the FMIC? Do you have any pics? Will stock piping fit?

Thanks!

China/No Brand

Should fit stock piping Im running stock piping on intake side but custom piping for hot side (Hi-Mount setup)

Looks just like a stock cooler only bigger

PM replied getyayaout

Edited by R32 Driver
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...