Jump to content
SAU Community

Recommended Posts

hey peoples

im after the following and i need it asap or when ever u have avilable

-A31 aftermarket cat back

-a31 facelift taillights and centre panel

-a31 facelift crome grill

-a31 facelift headlights(non projector

please as i dont wanna have to fly over nz and buy this shit and lug it bak

let me know

  • 2 weeks later...

to mr cr drift no its not bro

its all the same as commo shit its at pickapart every second day

and i will be using import monster for all ym bitz ive decided and hes on forum unlike ns which is just a melting pot for gimps

to mr cr drift no its not bro

its all the same as commo shit its at pickapart every second day

and i will be using import monster for all ym bitz ive decided and hes on forum unlike ns which is just a melting pot for gimps

LOL, I used worked in napier at a used/import parts wreckers, facelift 3 stuff, not that easy find in NZ, you can if you look hard enough, and no you won't be finding a crome cefiro grille every second day at pickapart, it took me 4 months to find facelift 3 bumpers for my a31 I had in NZ,

early cef stuff at ripoffapart. very plentiful but none wants a RB20E

ps. do people still buy stuff at pickaprt?, the asses charged me $10 for 2 exhaust rubbers i needed right there and then, and the poor indians in front of me got ripped $250 for a bare diamante nose cut, the monkey at the counter wanted them to even go as far as removing the clips and rubbers off it to make it "bare"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...