Jump to content
SAU Community

Garage Cleanout - Rb26 Aftermarket And Other Bits

dahandfull
 Share

Recommended Posts

dahandfull Proficient

dahandfull

Posted
Posted

Listed here is a few items that I don't need anymore as I have changed direction with the build for my 32GTR. As its almost complete, i have no need for this stuff anymore and want the space in the shed for other things. All of the motor parts had been fitted and balanced to my motor but never actually turned over (my workshop can vouch for this, some still like new). The parts have since been removed and cleaned.

Willing to accept reasonable offers, ono's, and FYI's as i would like this stuff gone ASAP. Any other queries, don't hesitate to send me a msg. I am located on the northside of Brisbane and will ship all items at buyers expense. Pick up is welcome.

Also, i am after a forged box or gearset, or a 34getrag gearbox and big brake kit, so i am interested in swaps too.

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- R33 GTR Crank. Has been cyro treated for added strength, some small balance marks as shown in the pics. $700

- CP 86.5mm pistons $800

- OS Giken twin plate clutch (pull type) has been fully reconditioned by Direct Clutch in Albion. $550

- Tomei Exhaust Manifold Gasket Set. brand new, unopened. $50

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Tomei sport steering wheel. Brand new, rare item. 350mm o.d. $200

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Pics to come later today/tonight

Cheers..

turbo rxp Community Regular

turbo rxp

Posted
Posted
Listed here is a few items that I don't need anymore as I have changed direction with the build for my 32GTR. As its almost complete, i have no need for this stuff anymore and want the space in the shed for other things. All of the motor parts had been fitted and balanced to my motor but never actually turned over (my workshop can vouch for this, some still like new). The parts have since been removed and cleaned.

Willing to accept reasonable offers, ono's, and FYI's as i would like this stuff gone ASAP. Any other queries, don't hesitate to send me a msg. I am located on the northside of Brisbane and will ship all items at buyers expense. Pick up is welcome.

Also, i am after a forged box or gearset, or a 34getrag gearbox and big brake kit, so i am interested in swaps too.

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- R33 GTR Crank. Has been cyro treated for added strength, some small balance marks as shown in the pics. $700

- CP 86.5mm pistons $800

- OS Giken twin plate clutch (pull type) has been fully reconditioned by Direct Clutch in Albion. $550

- Tomei Exhaust Manifold Gasket Set. brand new, unopened. $50

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Tomei sport steering wheel. Brand new, rare item. 350mm o.d. $200

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Pics to come later today/tonight

Cheers..

can u send me pics of the clutch , and costs for postage to melb post code 3020

dahandfull Proficient

dahandfull

Posted
  • Author
Posted

Few more items sold pending funds transfer. The below items are still available. Make me an offer =)

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- CP 86.5mm pistons $800

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

levelride Contributor

levelride

Posted
Posted (edited)
Few more items sold pending funds transfer. The below items are still available. Make me an offer =)

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- CP 86.5mm pistons $800

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Will take the silicon hose if you will ship to the USA mate..? Postal code 97302... Thanks and Cheers

Edited by levelride

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...