Jump to content
SAU Community

Recommended Posts

Listed here is a few items that I don't need anymore as I have changed direction with the build for my 32GTR. As its almost complete, i have no need for this stuff anymore and want the space in the shed for other things. All of the motor parts had been fitted and balanced to my motor but never actually turned over (my workshop can vouch for this, some still like new). The parts have since been removed and cleaned.

Willing to accept reasonable offers, ono's, and FYI's as i would like this stuff gone ASAP. Any other queries, don't hesitate to send me a msg. I am located on the northside of Brisbane and will ship all items at buyers expense. Pick up is welcome.

Also, i am after a forged box or gearset, or a 34getrag gearbox and big brake kit, so i am interested in swaps too.

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- R33 GTR Crank. Has been cyro treated for added strength, some small balance marks as shown in the pics. $700

- CP 86.5mm pistons $800

- OS Giken twin plate clutch (pull type) has been fully reconditioned by Direct Clutch in Albion. $550

- Tomei Exhaust Manifold Gasket Set. brand new, unopened. $50

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Tomei sport steering wheel. Brand new, rare item. 350mm o.d. $200

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Pics to come later today/tonight

Cheers..

Listed here is a few items that I don't need anymore as I have changed direction with the build for my 32GTR. As its almost complete, i have no need for this stuff anymore and want the space in the shed for other things. All of the motor parts had been fitted and balanced to my motor but never actually turned over (my workshop can vouch for this, some still like new). The parts have since been removed and cleaned.

Willing to accept reasonable offers, ono's, and FYI's as i would like this stuff gone ASAP. Any other queries, don't hesitate to send me a msg. I am located on the northside of Brisbane and will ship all items at buyers expense. Pick up is welcome.

Also, i am after a forged box or gearset, or a 34getrag gearbox and big brake kit, so i am interested in swaps too.

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- R33 GTR Crank. Has been cyro treated for added strength, some small balance marks as shown in the pics. $700

- CP 86.5mm pistons $800

- OS Giken twin plate clutch (pull type) has been fully reconditioned by Direct Clutch in Albion. $550

- Tomei Exhaust Manifold Gasket Set. brand new, unopened. $50

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Tomei sport steering wheel. Brand new, rare item. 350mm o.d. $200

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Pics to come later today/tonight

Cheers..

can u send me pics of the clutch , and costs for postage to melb post code 3020

Few more items sold pending funds transfer. The below items are still available. Make me an offer =)

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- CP 86.5mm pistons $800

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Few more items sold pending funds transfer. The below items are still available. Make me an offer =)

- Tomei Pro Cam Camshafts In & Ex, 270o 10.80mm lift $650 (will require head work to fit)

- CP 86.5mm pistons $800

- Greddy silicone hose. 60mm length, and will fit 2"-2.5" pipe. used $20

- Trust AIRINX pod filter 100mm inlet used $20

- Silicone hose reducer. 3" to 2.5" used $10

- Roll bar padding, enough to cover a bolt in jap style cage. used, still very good condition $25

- R33 gtst alloy wheels inc tyres and centre caps. painted black. 2 tyres are michelin pilot, other 2 are barum bravura directionals. both are 225/50/16 (wouldn't recommend road use, good for drift - lots of tread left). $150

Will take the silicon hose if you will ship to the USA mate..? Postal code 97302... Thanks and Cheers

Edited by levelride

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...