Jump to content
SAU Community

Recommended Posts

Hi all looking to buy an GTR R32 as it's the look i like most out of the GTR'S just trying to do research first before seriously taking the next step and buying one, power wise i'm not really wanting to go more than a better fmic, exhaust, and a bit more boost maybe a little large huffers i do have a motec m48 not sure at this stage if that is worth keeping it for the GTR?? as a lot of guys seem to use power fc's? and since the R32 is a lot cheaper these days makes it a good time to find what i'm looking for and at a decent price.

so any do's and don'ts on what i should be looking out for in the R32 GTR i've read that the pre 92 model had issues with the oil pump which was rectified in post 92 models also i like the fact that R32's can be switched from awd to rear wheel drive by replacing the fuse with a switch, just a couple of things i've read so far so any more help on buying a GTR would be much appreciated.

Also what i would like to know is what type of internals from factory does the RB26 in the R32 GTR come with ie: forged rods? forged slugs? ect.. is there a book on the GTR with such info? and most importantly are the five speed gearbox much stronger than a WRX one as the wrx gearbox really lets it down once you up the power somewhat.

PS: only looking for a reliable daily driver with about 260-280kw atw

regards wayne

Link to comment
https://www.sau.com.au/forums/topic/305046-beginners-info-needed/
Share on other sites

People will say look for a post 89, 90, 91, etc.

Basically the newer the model the better the condition should be.

Not totally true.

I've seen 94 examples that looks more shocking than the first bunch that came out in 89.

Before I got my R32 GTR I avoided 89 models because being the first years I thought they may have some initial teething problems as with any first year models. However, if there was a problem then most if it should have been already rectified by their original owners anyway.

That said, getting a latter model would usually be better.

the skyline gearbox is bulletproof in comparison to the wrx gearbox

you wont have any issues with gearbox even with abuse

make sure you have some spare $ on the side in the case of other issues, gtr's can be costly

When you think you've figured out how much it will cost to fix any issues you've found, add approximately 30-500% for all the other unknowns and remember you pay the GTR tax on all parts.

They're not a cheap car to own, even if you do all of the work yourself.

On that note, I love every single minute I spend in mine. Well worth it.

Edited by Bozz
When you think you've figured out how much it will cost to fix any issues you've found, add approximately 30-500% for all the other unknowns and remember you pay the GTR tax on all parts.

They're not a cheap car to own, even if you do all of the work yourself.

On that note, I love every single minute I spend in mine. Well worth it.

Yeah i figured that as my last car was a jap legacy import, genuine parts were at crazy prices, but cars are our passion and i dont know anyone who finds there passions cheap, besides you only live once.

PS: i hear ya about loving every minute in your ride i'd say thats passion wright there :D

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...