Jump to content
SAU Community

Recommended Posts

Hi Guys...

I have spoken with andrew, and he assures me they're juuuuust about done: ready to go into the oven ( I assume for undercoating)...

Apparently we should expect them on our doorsteps mid February. He has apologised profusely for the delays so far, and said he'll be in more regular contact from now on (although exactly how much we will need to know in the next 2 weeks is a moot point...).

So, there you have it.

To anyone else who's interested, I'll be getting my kit fitted pretty much straight away: I'll post pics when it's done! :)

Link to comment
https://www.sau.com.au/forums/topic/305804-roof-rail-replacement-kits/
Share on other sites

  • 3 weeks later...

Ok: just spoke with him again, and there will be a small delay (as usual): He has assured me he is onto it (we had quite a long and informative chat), and they will be ready ASAP - within the next couple of weeks. Patience, peeps!

I'll keep you guys in the loop as things develop.

  • 2 months later...

I have contacted Andrew again, as there was no word from him, and the kits were at least a week overdue after his last expected date.

Long story short, he is HOPING to have them ready for shipment mid next week.

Getting frustrated now...

I have contacted Andrew again, as there was no word from him, and the kits were at least a week overdue after his last expected date.

Long story short, he is HOPING to have them ready for shipment mid next week.

Getting frustrated now...

Haha... It has been a very long ordeal. Im sure everyone including myself will be stoked once we get them. Have you had your roof rails out this entire time waiting for the replacments?

Haha... It has been a very long ordeal. Im sure everyone including myself will be stoked once we get them. Have you had your roof rails out this entire time waiting for the replacments?

I chased him up 2 days ago as well

Stagman, we will get ours sent up togather to save postage.

Haha... It has been a very long ordeal. Im sure everyone including myself will be stoked once we get them. Have you had your roof rails out this entire time waiting for the replacments?

I've had them off for over a year now: this whole thing started when another Gold Coast workshop stuffed me around for 7 months, after quoting me 2 weeks to modify the rails I bought from Japan.

Note to all who buy the kit: I discovered some light surface rust on the roof under where the rails sit, and am unsure (and doubt) if the original removal of my rails caused it: could be like the "rust under the mirrors" problem - if the rest of you guys find the same thing, then we can assume it's another common issue....

I've had them off for over a year now: this whole thing started when another Gold Coast workshop stuffed me around for 7 months, after quoting me 2 weeks to modify the rails I bought from Japan.

Note to all who buy the kit: I discovered some light surface rust on the roof under where the rails sit, and am unsure (and doubt) if the original removal of my rails caused it: could be like the "rust under the mirrors" problem - if the rest of you guys find the same thing, then we can assume it's another common issue....

..Eeek

I've had them off for over a year now: this whole thing started when another Gold Coast workshop stuffed me around for 7 months, after quoting me 2 weeks to modify the rails I bought from Japan.

Note to all who buy the kit: I discovered some light surface rust on the roof under where the rails sit, and am unsure (and doubt) if the original removal of my rails caused it: could be like the "rust under the mirrors" problem - if the rest of you guys find the same thing, then we can assume it's another common issue....

bugger!! maybe if these rails ever get made i better get a set so i have an excuse to check for rust

watch this space: mine will be fitted and painted as soon as I get them.

Guys

Andrew needs to know if your car has sun roofs, as they will need different mounting bolts to cars without.

An email has been sent to let him know

PS

My car had NO rust under the rails

  • 4 weeks later...

ok: He's finishing up the kits today or tomorrow: he has promised to send pics of the finished product asap. Assuming we're all happy, we can then pay the balance, and they should be on their way to us late this week/early next week...

  • 3 months later...
what ever happened to this?

After 13-14 month wait they turned up last week.

I have tried a quick fit and they fit like shit. Not too happy with them

Will be a couple of weeks before I get time to refit and rework them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...