Jump to content
SAU Community

Recommended Posts

so today had my hicas lock bar and wheel alignment done by ken at accurate suspension services here in brisbane.

He has told me to get my car going straight i'll need some arms to adjust castor. (car is pulling to the left)

He recommended i use some adjustable rose jointed arms as they will allow the most adjustment.

I expressed my concern about running rose jointed stuff as ive read here many a time its no good for the street. (my car is a daily)

He mentioned i could try the adjustable super pro bushes and they "might" just get me enough adjustment to get it right.

I would like to know my options here. I'd rather use a rubber type mount if possible.. are rose joints that bad? Stay away from pillowball im guessing?

What brands are best and where should i buy them?

For example... could i use something like this?

http://www.rhdjapan.com/ikeya-formula-stre...-350z-2wd-50338

i really dont want to spend 400 odd dollars on something like cusco or ikeya or whatever as its only a daily driven r34 gtt that will at most see the track once or twice a year.

Ideas?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/305813-castor-armtension-rod/
Share on other sites

If u don't wanna spend much, just get SuperPro offset bushes. If want more caster which will feel and handle better, go with Kazama ones. They're high quality and have dust boots on the rod ends which will make em last way longer. They're around the 300 dollar mark.

thanks mate.

Yeah i saw those kazama ones $255 from rhd apparently. does anyone stock them in Aus?

superpro bushes are roughly $130ish i think so not a huge difference.

what about stuff like the JJR items?

i put white line adjustable castor bushes ($140 NZ) in my stagea and it made a huge difference . youll find if you drive on the wrong side of the road will pull right. lack of castor makes car follow camber on road .now my left is on max which got me 4.25 degrees of castor and right is on 4 degrees and its mint as .

i put white line adjustable castor bushes ($140 NZ) in my stagea and it made a huge difference . youll find if you drive on the wrong side of the road will pull right. lack of castor makes car follow camber on road .now my left is on max which got me 4.25 degrees of castor and right is on 4 degrees and its mint as .

apparently the superpro bushes give more adjustment then the whiteline?

sourced a set of kazamas for 265 posted. so i think i might get these.

just dodgily checked my toe:

right front - can fit my 3 middle fingers in easy between back of tyre and mudflap.

left front - can only fit 2 and a half if that in between back of tyre and mudflap.

so quite a difference

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...