Jump to content
SAU Community

Rb26 Race Head

SRB
 Share

Recommended Posts

SRB Veteran

SRB

Posted
Posted

selling my rb26 race head, i changed direction with my engine, after experienceing electrical problems with the gtr putting it in a workshop for a very long time and after alot of thinking deciding to change a few things, so hence the sale. i had a new head built for my new setup.

seen about 1500-2000km driving and dyno runs

was part of a setup that made 565awkw @ 21psi on pump fuel, so the head is good for it and is really really strong.

looking for around $7500, which is merely half of what it cost to build! needs to be sold asap to fund new setup.

Parts list:

Ferrea 1mm oversize stainless valves

Aftermarket valve guides

Apexi V-Max SPL springs, retainers and buckets

Apexi V-Max SPL 280 deg 11.5mm lift cams

Tomei camshaft stud kit

Trust cam gears

New stem seals

whats been done to the head:

Ported intake + exhaust runners

Profile guides

Polished + cc'd chambers

Unshroud valves in chamber

Flow benched and runner flow equalised

Steam hole modifications/water gallery modifications

Clearanced for high lift cams

Drilled for 1/2inch head studs

Flow figures:

Lift Int Exh

0.05 51.9 46.4

0.1 100.4 94.5

0.15 147.2 134.8

0.2 186 167.5

0.25 221.3 197.2

0.3 252.4 219.5

0.35 277.5 229.7

0.4 292.9 236.8

0.45 304.7 240.8

0.5 309.2 241.8

heres a few pics before the head was fitted up..

post-23724-1264859137_thumb.jpg

post-23724-1264859163_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/306140-rb26-race-head/
Share on other sites
  • 2 weeks later...
SRB Veteran

SRB

Posted
  • Author
Posted

hey its only a 3L haha i built a new head because we did specific porting with it after some guidance from o/s regarding circuit work coz thats where i wanna focus most of the car, but its all goin together this week with a T51R KAI, so prob around 500AWKW but really responsive, torquey and a very nice curve. hows ur car goin, my bro saw i i think and tried to tell me to put an auto in it haha

Link to comment
https://www.sau.com.au/forums/topic/306140-rb26-race-head/#findComment-5110161
Share on other sites
SRB Veteran

SRB

Posted
  • Author
Posted
Are you using that spare os rb30 you have or a nitto crank and rods from croydon?

ye im using the OS RB30 i had here. this car is doing my head in! haha 3 years now

hey sorry i know its a little off topic..

you dont have any rb30 cranks lying about?? i need one to keep my build going.

no sorry. i do have a mad head for sale haha

Link to comment
https://www.sau.com.au/forums/topic/306140-rb26-race-head/#findComment-5111143
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...