Jump to content
SAU Community

Recommended Posts

selling my rb26 race head, i changed direction with my engine, after experienceing electrical problems with the gtr putting it in a workshop for a very long time and after alot of thinking deciding to change a few things, so hence the sale. i had a new head built for my new setup.

seen about 1500-2000km driving and dyno runs

was part of a setup that made 565awkw @ 21psi on pump fuel, so the head is good for it and is really really strong.

looking for around $7500, which is merely half of what it cost to build! needs to be sold asap to fund new setup.

Parts list:

Ferrea 1mm oversize stainless valves

Aftermarket valve guides

Apexi V-Max SPL springs, retainers and buckets

Apexi V-Max SPL 280 deg 11.5mm lift cams

Tomei camshaft stud kit

Trust cam gears

New stem seals

whats been done to the head:

Ported intake + exhaust runners

Profile guides

Polished + cc'd chambers

Unshroud valves in chamber

Flow benched and runner flow equalised

Steam hole modifications/water gallery modifications

Clearanced for high lift cams

Drilled for 1/2inch head studs

Flow figures:

Lift Int Exh

0.05 51.9 46.4

0.1 100.4 94.5

0.15 147.2 134.8

0.2 186 167.5

0.25 221.3 197.2

0.3 252.4 219.5

0.35 277.5 229.7

0.4 292.9 236.8

0.45 304.7 240.8

0.5 309.2 241.8

heres a few pics before the head was fitted up..

post-23724-1264859137_thumb.jpg

post-23724-1264859163_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/306140-rb26-race-head/
Share on other sites

  • 2 weeks later...

hey its only a 3L haha i built a new head because we did specific porting with it after some guidance from o/s regarding circuit work coz thats where i wanna focus most of the car, but its all goin together this week with a T51R KAI, so prob around 500AWKW but really responsive, torquey and a very nice curve. hows ur car goin, my bro saw i i think and tried to tell me to put an auto in it haha

Link to comment
https://www.sau.com.au/forums/topic/306140-rb26-race-head/#findComment-5110161
Share on other sites

Are you using that spare os rb30 you have or a nitto crank and rods from croydon?

ye im using the OS RB30 i had here. this car is doing my head in! haha 3 years now

hey sorry i know its a little off topic..

you dont have any rb30 cranks lying about?? i need one to keep my build going.

no sorry. i do have a mad head for sale haha

Link to comment
https://www.sau.com.au/forums/topic/306140-rb26-race-head/#findComment-5111143
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...