Jump to content
SAU Community

Recommended Posts

my brother is considering buying one of these

i dont know much about them

wat should he look for with the car?

good points and bad please?

seems to be in a good sort of condition

burgandy in colour

need to replace the right side headlight cover

downside is that its done about 310,000k's

are parts easy to find?

engine conversions?

any info appreciated

thanks guys

ambs

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/
Share on other sites

Sounds like a good price - good car on a budget. Parts are easy to find and all mechanics know them pretty well. It was my last car before my R33, had no major problems and was pretty cool for what u get (although didn't look anything flash)

Mine was still going strong on 250,000km or so, and many people get about 400,000km out of them - so they're a good workhorse.

Go for it as long as the body is shipshape.. if the engine blows should be able to get another one put in for under $1k or so.

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/#findComment-621295
Share on other sites

1,250 is good.

yeah it's got high km's... but as others have said, the RB30 you can get 400,000 out of.

I'd be checking the Diff for whine, the Borg Warner is well known for it... and if it is getting noisy then it is on the way out.

Other than that, get it checked out etc by a mechanic.

Parts are easy to come by so dont worry about 2nd hand parts.

It's no Import Skyline or anything and most bits are interchangeable from the motor out of the VL.

it'll serve him well if it is in good nick.

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/#findComment-621342
Share on other sites

need to replace the right side headlight cover

If it's just a cracked cover, then take the left one off.

downside is that its done about 310,000k's

It's a Skyline.... it can handle it :)

are parts easy to find?

Too easy

engine conversions?

Lots of options, starting with basic NA mods, extractors, pod, exhaust.

If he wants to go turbo, then the VL turbo bolt on bits will give him a nice and easy extra 30 to 50rwkw

Then if he's still power hungry, there are still places to go.

RB25det, RB26det, RB30det.........

How much does he want to spend on mods? :D

As far as enginge modifications go, its gotta be one of the easiest to modify.

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/#findComment-621436
Share on other sites

thanks for the info guys

sounds good!!

ill advise him of wat u have all said

and get the car checked out asap!

OH and hes not really thinking about mods at the moment

probably just dump it and zorst

i was just asking incase the engine does go

wat opions would he have

but thanks i got the info i need now

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/#findComment-621440
Share on other sites

check for any rust in the doors and around the doors also in the wheel arches.

they are good cars a mate of mine had one with a shit load of k's and it neva gave any trouble. You could probably get a freshn'd rb30det to put in later on.

then it would be CRAZY!!!!!!!

hehe

take it easy

Mark

:)

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/#findComment-623450
Share on other sites

look out for rust along the top of he windscreen

also the auto boxes in the series 3 skylines were a bit shonky. Most of them don't last. Other than that they are great cars. I had mine for 6 - 7 years, and the whole time the only problem I had was a lown exhaust manifold gasket.

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/#findComment-624120
Share on other sites

I had a Silho before my coupe and was a great car. This is what to look for, noisey Borg Warner diff they need to be rebuilt around the 100,000 k mark as they get a whine up around the 100KPH. I have seen RB30E with 300,000ks and still have hone marks on the bore, if looked after from day one, have been known to get 700,000'ks out of a motor. SerIII Auto never had their bands adjusted properley out of the factory so if it is still running properley would be good to get them checked and set properley. Rust they usualy only have rust if they have been treated like crap thats why the little buggers are all over the place still after 17 years the only reason they end up in Wreckers is due to prangs.

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/#findComment-625400
Share on other sites

Guest SXY.033

I had exactly the same car (colour and everything) - number plate is not DCW-xxx is it?

- Anyway there was a common problem where water would gather at the bottom of the spare wheel and rust right through. Might be something to check.

- The borg warner lsd is a bit dodgy - only aussie made part on the whole car apparantly. Only need to worry if its making a whining noise.

Is it the series 1 (with the rear bar lights, and front block type headlights)??

- series one came with a 4 speed auto mechanical tranny - while series 2 and 3 came with 4 speed electronic auto.

Apart from that - the engine is bulletproof like many others have said.

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/#findComment-628837
Share on other sites

I had exactly the same car (colour and everything) - number plate is not DCW-xxx is it?

- Anyway there was a common problem where water would gather at the bottom of the spare wheel and rust right through. Might be something to check.

- The borg warner lsd is a bit dodgy - only aussie made part on the whole car apparantly. Only need to worry if its making a whining noise.

Is it the series 1 (with the rear bar lights, and front block type headlights)??

- series one came with a 4 speed auto mechanical tranny - while series 2 and 3 came with 4 speed electronic auto.

Apart from that - the engine is bulletproof like many others have said.

its got the round stove top lights

ill try get some pics of it to post up

looks pretty scmik actually

nice two tone colour

Link to comment
https://www.sau.com.au/forums/topic/30690-r31-silhouette/#findComment-628859
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...