Jump to content
SAU Community

Recommended Posts

Hey guys,

A couple of months ago I bought an r34 gtt. But lately it has developed a new trick.

Within 10 mins of the first drive of the day the tcs off and slip signs come on, as well as the malfunction indicator light. It usually just takes a few stationary restarts to get it back working, but i was just wondering what the cause could be?

I had a look round for similar topics but most people seem to have permanent tc problems, whereas mine is only in the first 10mins of driving and temporary.

Any clues?

Thanks heaps

Link to comment
https://www.sau.com.au/forums/topic/307312-tc-failure/
Share on other sites

  • 1 month later...
its getting worse. yesterday the error light came on, tc turned off and the car ran like shite for a while. 2 restarts later and it went back to normal. i guess this is some ecu problem?

It may pay to check if a previous owner has put in a TCS modifier this reverses the switch function (so you have to turn it on not off after you've started the engine) and is hard wired in near the tcs control unit in the boot.

I was going to put one in but decided against it for no particular reason after I'd bought it.

It may have been poorly installed or removed and have damaged the wireing.

Just a thought.

Edited by BASHO
Link to comment
https://www.sau.com.au/forums/topic/307312-tc-failure/#findComment-5147635
Share on other sites

Mine does the exact same thing mate.

It' will slowly get worse, to the point where the lights will only stay off from startup until you put it in gear, then straight on, and stay on.

I've found that occasionally nailing it (wheelspin) can turn 'ON' TRC again (ie, lights 'off'). Rare. I think it's simply a broken wire, possibly transmission tunnel area, as I pulled the carpet up to dry it out*, and the lights went out for a day and a bit, but came back.

I'm certain it's not a broken wheel speed sensor, as ABS still works fine.

The ENG light occasionally (rare) comes on, and gives code 28, I have no idea what that refers to, I simply clear the codes, and it's fine. The first time I got this code was when I tried remote starting it in 'Drive', and the sensors denied start procedure. Other times haven't had a pattern.

If I park facing downhill (only) and it rains heavily, the cabin air intake/front rain gutter area overflows near the driver's A-pillar and leaks into the driver's footwell (*hence \drying the carpet above :blink: ) Is this a common fault?

Edited by nato_wp
Link to comment
https://www.sau.com.au/forums/topic/307312-tc-failure/#findComment-5148321
Share on other sites

The ENG light occasionally (rare) comes on, and gives code 28, I have no idea what that refers to, I simply clear the codes, and it's fine. The first time I got this code was when I tried remote starting it in 'Drive', and the sensors denied start procedure. Other times haven't had a pattern.

thanks for the info mate. how do i see the error codes? and does anyone know where a key to the codes is?

Link to comment
https://www.sau.com.au/forums/topic/307312-tc-failure/#findComment-5156620
Share on other sites

lol ill answer my own question for anyone who may have been awaiting an answer:

error codes can be checked using this method

http://www.skylinesaustralia.com/forums/Re...de-t266512.html

lol, being a newb is a little tiring sometimes. i'm yet to do a search for coilpack problems, but it sounds like that's going to be the problem

cheers

Link to comment
https://www.sau.com.au/forums/topic/307312-tc-failure/#findComment-5168683
Share on other sites

You might want to invest in a console cable, i got mine for $60 off ebay. Invaluble tool for getting stats/error codes and running diagnostics on all older pre OBD-II nissans.

i will do that sometime in the near-ish future, but atm slightly conservative on the mulahs.

just wondering tho, why would coilpacks bailing cause the tc to fail?

Link to comment
https://www.sau.com.au/forums/topic/307312-tc-failure/#findComment-5173570
Share on other sites

  • 2 weeks later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...