Jump to content
SAU Community

Recommended Posts

hi all

had a huge mishap at mallala recentlly snapped a custom 1 peice tailshaft in 5 places, 23 holes threw out the trans tunnel, took out bottom side of my handbrake and all cable's, twisted the motor up and threw the radiator snapped starter motor in half..

bad times

all happened on my very first lap driving my new 350rwkw+ setup

im wondering what is interchangable handbrake cable wise..

is cefiro handbrake cables exact same as r32?

and anyone know if r34 brake booster fits a ceffy too??

already have r33 brakes but factory booster so pedal feels dull..

cheeers in advance..

tom :D

Link to comment
https://www.sau.com.au/forums/topic/308817-smashed-cefiro/
Share on other sites

not sure y your posting in this section

the cables may fit dont think anyone has tested them yet, they will bolt on.

not sure if u have to shorten or lengthen it, but u cant use the hand brake lever/ front cable as it only has one join coupling not 2 like the r32. u will need 2 drill out the hand brake mount spot welds and bolt in a r32 mount so u can bolt on the lever /front cable

Link to comment
https://www.sau.com.au/forums/topic/308817-smashed-cefiro/#findComment-5095898
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...