Jump to content
SAU Community

Recommended Posts

Expression of Interest

1995 R33 GTS25T S1.5 RB25DET - 123K kms (services 600kms ago with Motul 300v Chrono motorsport oil).

5 speed manual

White

Rego till April

- Trust Greddy Turn Flow FM FMIC (uses factory piping)

- HKS 2540 turbo (240rwkw at 1.2Bar. Driven at 0.6 bar)

- Bosch 044 Fuel Pump

- Malpasi Fuel Regulator

- Hi Flowed Factory Injectors

- Cooling Pro Alloy Radiator (52mm)

- Exedy Cushioned Button Clutch

- Apexi AVCR Electronic Boost Controller

- 3" RSR Catback Exhaust with dump/front pipe

- Garage Saurus Chipped ECU from Japan

- F17x8 +30 R17x9+35 Work Meister S1 2 Piece Rims (white) 245/40/17 KU31 tyres all round.

- R33 GTR rear Sway Bar (27mm)

- D1 Spec Oil Catch Can

- Front Strut Brace

- Z32 Air flow meter

- Bilstein Coilovers

- JVC MP3 head unit with Bilken Ipod caple

- Fusion 6x9

- Nismo Side indicators

- Mspec kit (front, side and rear pods)

- 15% tints all round

- Metal Intake Pipe with Pod (not installed)

Reason for sale: I need a daily driver for work because my student card will finish in march and my public transport bill will double (hence it will be cheaper to drive).

BTW this is just an expression of interest because i havnt had this car for all that long and i love it so its not an easy decision.

17465_213498005884_629240884_3140514_3300072_n.jpg

18865_225351970884_629240884_3196349_4761690_n.jpg

IMG_0339.jpg

21065_301898485884_629240884_3505658_6417015_n.jpg

Price: $13,900 with Meisters or $12,00 BYO wheels.

Willing to trade but i dont want a high powered fuel guzzling machine.

Contact via Pm please

  • 2 weeks later...
BUMP

Willing to trade for good condition Mx5!!

BUMP

Car is now fitted with hicas lock bar - new rear break discs and machined front discs - Bendix Ultimate pads all round - Clutch has been adjusted so all good - new D1 hicas boss kit and JJR drift 350mm deep dish steering wheel in seude - new airbag wiring unit and horn wires

all this and the price is still the same!!!

IMG_1286.jpg

26046_327281410884_629240884_3585017_3711487_n.jpg

Edited by ahmad

New mods:

- Greddy Full Auto Turbo Timer

- Hicas removal/lock bar

- Bendix Ultimate brake pads all round

- HKB Hicas boss kit + JJR Dirft style deep dish 350mm steering wheel

- 1kg Fireextinguisher mounting kit

- D1 Spec light weight Lug Nuts (long version) Blue

- 15% tints all round

- Metal Intake Pipe with Pod (not installed)

- 3 inch decat pipe (not installed)

MOD LIST UPDATED

BIG PRICE DROP - I'VE FOUND SOMETHING I WANT AND DONT WANT TO MISS OUT BEFORE MARCH WHEN MY STUDENT CARD EXPIRES

NOW ONLY 12,400 OR 10,500 BYO WHEELS

Now comes with plates RB10VE

Don't know what else someone would want, there is enough parts on there to get what I'm asking for, if it doesn't sell soon I'll be parting it out.

All good dudes

Another price drop

PRICE DROP $12,000 NEG OR $10,100 BYO WHEELS???

THROW ME SOME OFFERS, YOU MAY GET LUCKY

I dont know how to edit the first post---- how do i edit the first post?

if by late march this car isnt sold - itll will be torn apart and sold bit by bit - im just lazy

Really, noone is interested in this???

I've found a mx5 down the coast and it's exactly what I want.

So pretty much, any offer is a good offer and will be considered.

PRICE DROP!!!! NOW $11,500 AS IS $9,600 without wheels!!!!!!

I dont know what else you want!!!! come on

EDIT: Can a mod please change the title to :

URGENT SALE: 1995 Nissan Skyline R33 S1.5 Mspec

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...