Jump to content
SAU Community

Injector Pintle Caps And O-rings

Aggroman

By Aggroman,
in New South Wales

 Share

Recommended Posts

Aggroman Grand Master

Aggroman

Posted
Posted

Hey all,

Did a bit of searching around but cant find a solid answer. So I thought I would ask in NSW as places in Vic are the only ones i can find

Bought a set of GTT injectors but cant find anywhere in the western sydney region to get some new pintle caps (the cap on the bottom end of the injector) and new o-rings for top and bottom..

I know of mobile injector cleaners that come out and clean them, replace all that but dont want to pay the callout fee of what would be more then 5 times the cost of new ones.

Nissan spare parts in penrith place looked at me like i was a retard.. Guy didnt seem to know wat to look for part no wise..

No luck google searching or ebaying either.

Any ideas where I can look?

Thanks,

David

Link to comment
https://www.sau.com.au/forums/topic/309256-injector-pintle-caps-and-o-rings/
Share on other sites
BB81DO Proficient

BB81DO

Posted
Posted

you will have to order them though nissan ... if my memary serves me right they are the same as the r33s and the part number ...... i well get the par number for you tomorrow when i go out to the car

jebud Collaborator

jebud

Posted
Posted

Hornsby Nissan quoted me $6 for the ring that sits in the manifold, $11 for the one connecting to the fuel rail, and $15 for the one in the injector. This was for RB20 injectors, and they have them in stock. I would say they might be the same for your injectors.

Hornsby Nissan - 1300 596 271

By the way, these guys aren't pelicans.

Aggroman Grand Master

Aggroman

Posted
  • Author
Posted

Thanks Jebud for the info,

I managed to get the o-rings.. $11 a pop is quite rediculous.

They didnt have the cap that sits on the bottom of the injector listed.. i guess ill have to use the ones off my old GT injectors if they fit something when i take them off..

Aggroman Grand Master

Aggroman

Posted
  • Author
Posted

thanks Andrew,

Tried doing a bit of searching around the net and 16636 72P00 seem to be for the r33 injectors and look a little different to mine (only 2 were broken off)..

Ill try and suss it out when i go back in to get the o-rings.

Thanks for the help guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...