Jump to content
SAU Community

R34 Exhaust Suggestions

Marcus89

By Marcus89,
in Engines & Forced Induction

 Share

Recommended Posts

Marcus89 Proficient

Marcus89

Posted
Posted

Recently i bought myself a 2nd hand exhaust which included a 3" mild steel front pipe highflow cat and 3.5" stainless steel catback exhaust.

I haven't installed the system yet as i am still tossing up between getting a new dump and front pipe or just running the stock dump with exhaust as is. The mild steel front pipe is made to bolt straight up to the standard dump as it tapers down to 2.5" at the dump side. Due to this fact i would be looking at replacing both front and dump pipe if changing them is recommended.

Now i am only really going to be street driving this car and not going overboard with mods. Plans are the exhaust, possibly FMIC although may not be getting up to those power levels where it is needed and a Nistune. Plan to keep the standard turbo and run around 11psi.

At this basic level of modification would the factory dump be a restriction at all? And even if the dump isn't a restriction is there going to be much of an issue going 2.5">3">3.5"?

Link to comment
https://www.sau.com.au/forums/topic/309802-r34-exhaust-suggestions/
Share on other sites
Marcus89 Proficient

Marcus89

Posted
  • Author
Posted

Anyone able to give us a hand? I'm sure theres a few people who have a good idea on whether the standard dump is very restrictive or not and whether the changes in size of the exhaust throughout will affect flow/performance.

  • 6 months later...
dazzvass Enthusiast

dazzvass

Posted
Posted

Going from small to big shouldn't hurt the flow. The standard dump pipe would be more restrictive than an aftermarket in some way.

The rule of thumb is the more power you pushing out from the engine, the more power increase a well suited exhaust will give you (to some extent of course).

Jay11 Community Regular

Jay11

Posted
Posted

The stock dump is still a restriction.

Just get one of them justjap front/dump pipes they're pretty cheap, coz you're not after big gains.

Ideally you would want it to be 3" or larger from the turbo back.

Have you got a better flowing panel filter or pod filter?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • Dose Pipe Sutututu
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Dose Pipe Sutututu · Posted

      Welcome back brother 
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...