Jump to content
SAU Community

Recommended Posts

Greddy,blitz, and Gizmo boost controllers

Apexi RSM

mongoose alarm

5zigen Exhaust for 33 gtst

Splitfire coil pack

walbro fuel pump

Cusco front strut brace

ARC return flow intercooler for 33 gtst

pics below

{BOOST}

Gizmo Electronic IBC, perfect condition complete unit with solenoid etc. 275 dollars

post-35087-1267318121_thumb.jpg

Blitz dual stage EBC. as new with solenoid and all neccessary hardware, 300 dollars

post-35087-1267318158_thumb.jpg

Greddy profec B spec 2 with solenoid etc, perfect condition. 300 dollars

post-35087-1267318904_thumb.jpg

{RSM}

post-35087-1267318243_thumb.jpg

Apexi RSM complete with harness. 100 dollars

Mongoose alrm with all neccessary hardware inc remote lock, siren, led shock sensor, remote contorller and siren key 250 dollars

{ALARM}

post-35087-1267318265_thumb.jpg

post-35087-1267318271_thumb.jpg

Full turbo back 3 inch exhaust with centre muffler and 5 zigen canon. after market dump. 450 dollars

{EXHAUST}

post-35087-1267318296_thumb.jpg

post-35087-1267318305_thumb.jpg

Splitfire coil pack suit 33gtst and 32 gtr. excellent condition. 375 dollars

{COILS}

post-35087-1267318342_thumb.jpg

Walbro fuel pump mounted in R33 cradle ready to drop straight in, save yourself time and money. 125 dollars.

{FUEL}

post-35087-1267318374_thumb.jpg

post-35087-1267318381_thumb.jpg

Cusco front strut brace to suit 33 skyline. some paint chips on on end plate but otherwise perfect. 100 dollars.

{STRUT BRACE}

post-35087-1267318422_thumb.jpg

ARC return flow front mount to suit 33 (dont know what else) item has been painted black stealth and could use a touch up. it is in perfect nick with zero fin damage, complete with return pipes. 650 dollars.

{INTERCOOLER}

post-35087-1267318465_thumb.jpg

post-35087-1267318472_thumb.jpg

Look at the pics, Its all there. full colour display head unit with remote and 6 speakers both alpine and pioneer, alpine amp included. 450 dollars for the lot

{ICE}

post-35087-1267318563_thumb.jpg

post-35087-1267318557_thumb.jpg

post-35087-1267318551_thumb.jpg

post-35087-1267318544_thumb.jpg

post-35087-1267318534_thumb.jpg

post-35087-1267318528_thumb.jpg

post-35087-1267318521_thumb.jpg

post-35087-1267318514_thumb.jpg

Link ecu housed in standard 33 nissan ecu housing, map sensor connection included. currently running a tune of around 400 hp. 850 dollars

{ECU}

post-35087-1267318658_thumb.jpg

post-35087-1267318650_thumb.jpg

Pivot shift light with controller. Blue led. 100 dollars

{SHIFT LIGHT}

post-35087-1267318715_thumb.jpg

{TURBO TIMER}

Greddy turbo timer complete. 80 dollars.

post-35087-1267318936_thumb.jpg

All items are in perfect working condition unless otherwise stated

I will post the smaller items at buyers expense but larger items are pick up only

I am located in Ipswich QLD and can be reached on 0413 863207.

Go at it folks.

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...