Jump to content
SAU Community

Recommended Posts

Hay guys I have up for sale a fibreglass remake?? of a 32gtr front lip spoiler.

It's charge speed. (stamped inside)

It's needs a small fibreglass fix.

Gun metal grey.

Looking for $200

pick up in SA only

Hayden 0401 515 676

post-71249-1267842092_thumb.jpg

post-71249-1267842295_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/310828-32-gtr-front-lip-spoiler/
Share on other sites

Umm how would you go about mounting this as it doesn't have he mounting tabs usually on the original item...?

I'd say you just screw it on with course little screws.

There's already holes in the spots you'd use.

I put a GTR lip on my GTST, you have to have the correct bar to start off with (won't just fit on any).

It has 5 slots at the front where the bolts slide in then you put it into place screw and screw the nuts on (once attached)

It also has holes on the side (about 3 each side) where you use the correct screws to hold it in place.

I had to go to Nissan to get the necessary bolts and crap (not cheap) :-(

See below for pics

post-60229-1268000558_thumb.jpg

post-60229-1268000664_thumb.jpg

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...