Psi. After Intercooler Install

[IslandHCR32]

Hello guys,

I've been doing some research on the pressure drop after an intercooler install and found some usful information. However, I still got a quick question. Just recently installed my cooler. When im gunning the throttle the psi's shoot up to around 0.6 bar or so and then slowly bleed down to around 0.5 bar. I ran out of road so i dont know if it bleeds any further. I just really noticed this after the install. Could it be possible that my wastegate isnt opening quick enough? Or i could i have a boost leak? I really dont feel any power loss. I know boost goes up after you do a few base mods. I.E. exhaust, intercooler. Just trying to get some input from you guys. Below are my mods.

R32 RB20DET

3.5" catback Exhaust

FMIC

Apexi Exhaust Control Valve

Cheers.

[Harey]

I think if you have a look at a few dynos in the dyno thread you will see that all stock turbo setups drop off boost as they get high in the rpm.

Everything sounds fine to me.

[R31Nismoid]

Nothing related to cooler/install

You just need boost control. EBC to hold it firm, upgraded actutor etc etc.

[IslandHCR32]

Nothing related to cooler/install

You just need boost control. EBC to hold it firm, upgraded actutor etc etc.

Thanks for the info guys. Love the forums here.