Jump to content
SAU Community

Recommended Posts

So not to overcomplicate one thread for people who may search these later I thought I should keep this subject separate.

Also while I have my interior stripped I am going to get the windows retinted as I have a damaged rear demister from the last mob that did it (I will name them if I'm allowed to!).

Specifically they somehow managed to cut all but about 2 or 3 of the bars, so I am going to have to get the tinting steam removed first, repair the damage to the demister & then when I am satisfied it's fixed, have the windows retinted.

I also need this done due to scrape marks on the door windows & the drivers door glass having been replaced.

Anyhow from reading I've done, there appears to be 2 places that are the go for re-tint, Autoperfection & Tint a Car.

Tint a car appears to be the only one that sells Bolle tinting from what I have seen so far & they are asking a significant premium for it ($50 more than their next best & at least 100 more than Autoperfections best product).

The big claim to fame with the Bolle tinting was that it is rated to reflect 90% of heat, where as all others are all only about 70%, which is a 2/3rd reduction, so quite significant. Has anyone on here tried the Bolle Tint and able to give a reasonable opinion on it? I am quite curious about this, but not sure if it's worth the extra coin.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/311757-tinting-workshops-bolle-tinting/
Share on other sites

we use pretty dark stuff for our surveillance vehicles and have found the old grey stuff was the best (and cheapest).

The new reflective stuff (like Bolle) can distort images and colours when wearing polaroid glasses and is hopeless to film through, not because of how dark it is but due to the material they use.

well all i can say is AutoPerfection is a club sponsor

and has done many many members cars to which i only heard like 2 complaints how it wasn't completed on time due to parcel shelves

This is actually encouraging, I'd rather have to wait around another hour, for them to do the job properly than get a shit job done on time. This will be the cars third lot of tint so I want it to be right!

we use pretty dark stuff for our surveillance vehicles and have found the old grey stuff was the best (and cheapest).

The new reflective stuff (like Bolle) can distort images and colours when wearing polaroid glasses and is hopeless to film through, not because of how dark it is but due to the material they use.

Hmmm funnily enough I wear polaroids, Bolle's no less! Almost sounds like the tinting itself is polarised, which would help explan such issues. Face 2 polarised surfaces 90 degrees from each other & all you will see absolutely nothing through them.

we use pretty dark stuff for our surveillance vehicles and have found the old grey stuff was the best (and cheapest).

The new reflective stuff (like Bolle) can distort images and colours when wearing polaroid glasses and is hopeless to film through, not because of how dark it is but due to the material they use.

so where is place to get this tint ay? used on surveillance vehicles.. or pm number contact details..

we got our cars done at tint a car (5 all up and we got a wicked discount saved over $120 per car for the bolle tint) the only issue that i had with the bolle (before i got it done) was that you had 2 choices a blue tinge or green tinge and having a black car both would have looked silly so i ended up getting the midnight one.

The bolle tint doesnt distort images when wearing polarised glasses its crystal clear. if you want a black tint go for something other than bolle.

Blue tint would look alright on a Red car to me. Was more on about the durability & effectiveness of the tint itself.

The only reason I will be going to Tint-A-Car is for this tint, didn't really think much of their customer service when I called them.

The guys at Autoperfection when I called where friendlier & more helpful that way. Only thing is I haven't become a club member yet to get the discount.... Do need to do something about that.

so where is place to get this tint ay? used on surveillance vehicles.. or pm number contact details..

you'll be immediately defected if you use our tint.......some cops tend to go easier on us by producing our licences.

Blue tint would look alright on a Red car to me. Was more on about the durability & effectiveness of the tint itself.

The only reason I will be going to Tint-A-Car is for this tint, didn't really think much of their customer service when I called them.

The guys at Autoperfection when I called where friendlier & more helpful that way. Only thing is I haven't become a club member yet to get the discount.... Do need to do something about that.

yeah, you'll need to produce your membership card

Steve there's no law against anyone asking for a discount, from any establishment, and they're not obligated to us in the refusal of any such discount either.

However, we probably need to train our sponsors better so as they only give the discounts to members displaying a card.....that responsibility falls back on us, the exec.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...