Jump to content
SAU Community

Recommended Posts

1995 R33 GTS-4 AWD Skyline Rare Model

all pics at http://www.boostcruising.com/forums/index....=538848&hl=

Was $12000 Now $10500 Not Negotiable With New White Wheels With Good Tread And OMP Suede Steering Wheel Price Will Be $11250

will throw in rims currently on the car with good tyers at no extra cost

willing to swap for something that can drift and is street legal of the same value

POSITIVES

*RB25DE (VCT) (110rwkws)

*5 Speed Manual

*R33 GTR DriveTrain

*Atessa 4WD System So Its Not 100% 4WD. Mainly Rear. Once You Loose Traction Then Front Wheels Kick In. On Dash It Shows SLIP 7 4WD.

*Factory Rear Active-LSD option very rare and good

*Slip Torque Plug Located In Boot ( To Make AWD to RWD )

*K&N Panel Filter

*FWD LSD

*Advanced Timing ( 16 BTDC )

*95000kms

*KYB Gas Shocks

*Greddy Strut Brace

*Rebuild Gearbox

*Exedy GTR H/D Clutch Just Installed With Machined Flywheel

*Full Power Options : Windows, Mirrors & Steering

*ABS

*Disc Brakes Front & Rear

*Castrol VMX 80 Gearbox Oil

*BF Goodrich Tyers on the front with about 75% + Tread Left

*1 Faklen and 1 Michelin On Rear Both With 75% + Tread Left

*2.5" Exhaust Cat Back

*Rego Till June

*Fully Imported And Complied in 2007

*17" Lenso Rims (Only 3)

*One 17" Starcorp Rim

*Standed Hight King Springs On Front (just Stiffer)

*Cut Springs On Rear Will Come With Pair Of Lovelles

*Keenwood Head Deck

*Genuine Nissan Skyline Floor Mats

*Only Put In 98 Vortex From Caltex

*comes with 15" kicker sub but no amps

*4x 6" brand new 2 way pioneer speaker

*brand new genuine OMP suede steering wheel with yellow stitching

more info about the 4wd at: http://en.wikipedia.org/wiki/ATTESA

ATTESA E-TS system is used in the following models:

* R32 and R33 (1989-1997) GTS4 Skyline

* GT-R - 1989–2003

* Nissan Stagea

* A31 Cefiro

* Infiniti G35x/Nissan Skyline (V35 & V36)

* Infiniti M

* Infiniti FX

* Infiniti EX35 (with Active Brake Limited Split for side-to-side torque split, as needed)

* Nissan Fuga (Known as Infiniti M in export markets)

This Car Is a Great Car, Drives Beautifully, Handles Excellent and Goes Really Good and Its P Plate Legal

NEGATIVES

*Has Scratches over it

*Rear Bar Touched Up In 1 Corner

*3 Small Dings

*Small Rust Occurring on Rear Wheels Arches

*front bar has scratches

*Other then that nothings really wrong with it

Edited by niiko101
Your link to boostcruising is down maybe this will help the sale http://www.boostcruising.com/forums/index....howtopic=538848

woops thanks for that

Edited by niiko101
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...