Jump to content
SAU Community

Recommended Posts

hi all, just had my motor rebuilt, all the usual stuff forged bottom end tommie cams port polished and flowed head by jhh, gt3076r with rear .82r housing all supporting gear, pfc 660cc injectors greddy plennum hks low mount manifold 044 fuel pump ect nothing missed, but when tuning the car would only push 412rwhp at 20psi heaps of psi left in it but did not push for more as the timing was a problem, at idle the cas was all the way to the right to get the 15deg at idle which the tuner thought cames where out but had aquick look and found that they matched up on top dead center marks, also the car had to have a high idel cause at lower rpm the was a miss but under throddle the miss was not there. oh and im running a water methanol kit if that changes any thing. what could be the reason for the cas to be so far retarded and the slight miss im assuming could be diry injectors? :)

Some timing lights appear to double the reading when setting idle timing.

Safest method is to insert a spark plug lead between #1 coil and #1 spark plug, then set timing "old school".

hi all, just had my motor rebuilt, all the usual stuff forged bottom end tommie cams port polished and flowed head by jhh, gt3076r with rear .82r housing all supporting gear, pfc 660cc injectors greddy plennum hks low mount manifold 044 fuel pump ect nothing missed, but when tuning the car would only push 412rwhp at 20psi heaps of psi left in it but did not push for more as the timing was a problem, at idle the cas was all the way to the right to get the 15deg at idle which the tuner thought cames where out but had aquick look and found that they matched up on top dead center marks, also the car had to have a high idel cause at lower rpm the was a miss but under throddle the miss was not there. oh and im running a water methanol kit if that changes any thing. what could be the reason for the cas to be so far retarded and the slight miss im assuming could be diry injectors? :(

best bet is to pull a spark plug and fit a conventional lead from plug into end of coil-pack and read the timing directly off the lead, i have had a few cars misread (too much noise) from the rear timing loop..... its not common but i need to do it once or twice a month as the indicated timing is too far off centre to be correct..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...