Jump to content
SAU Community

Parting Out A Complete R33 Gtst Series 1 - Lots Of Aftermarket Bits


Recommended Posts

Parting out a complete series 1 R33 GTST

If a part you are after isn't listed, just ask.

Parts are located in Ipswich, QLD

Postage not included - buyer to arrange own post for large items

PM, Post or text 0414 249 292 (only call after 6pm)

Engine/Driveline stuff

RB25det - complete engine with all ancilliaries - $1250 (has HKS cam gear, polished CAS and polished cam covers)

Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600

Garrett GT3582R exhaust housing, .82 - $250

Jun "style" inlet manifold, still over $800 new on ebay - $600

BMI 86mm billet throttle body - $250

Deatschwerks 740cc injectors (straight fit in factory rail) - $450

SARD FPR, with gauge and adaptor for factory rail - $150

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Performance-wise Oil cooler and filter relocation kit - $200

MSpec aluminium radiator, pretty sure it's 45mm - $200

KTS Intercooler, 600x300x100, 3" in and out - $200

FMIC, 600x300x70,3" in and out, BRAND NEW - $150

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - $350

Excedy twin plate clutch, plenty of meat left - $1000

Lightweight chromoly flywheel, good condition - $250

RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000

5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250

Splitfire coil packs, perfect working order - $350

JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - $100

Turbosmart Type 2 plumb-back BOV - $150

R33 non ABS diff, shimmed a few years ago, still nice and tight - $100

Suspension/Brakes

Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000

Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350

Adjstable Rear upper camber arms - $100

HICAS lock bar - $50

Front adjustable castor arms - $100

Front strut bar, polished - $100

Rear strut bar, factory - $100

Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - $300

Rear brakes, stock - $150

Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - $1000

Electronics

Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - $1000

Blitz dual SBC EBC, the older black one, dual solenoid good working order - $250

NISMO clear side winkers - $50

Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three

Pioneer CD/MP3 headunit, basic model, black, removable face - $50

Jaycar response 4ch amp - $100

Fusion 12" sub in box- $50

Body & Interior

Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400

NISMO GT shift knob, excellent condition - $50

Series 2 steering wheel, very good condition - $150

Series 1 headlights, sedan model with silver inserts, excellent condition - $300

Rear lights, black - $50

Series 2 rear wing, black, with boot - $100

Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - $250

Type M side skirts, good condition - $150

400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150

Type M rear pods, black, good condition - $80

Series 1 dash surround, very good condition, has been stripped and repainted - $100

Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100

Drivers side window switch panel - $100

Series 2 seats, front and rear, drivers side has tear in bolster - $50

Interior carpet and boot trim - $60

Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40

More to come as I think of it

Reasonable offers considered but lowballers will be ignored

Pics to follow

pics on thease parts plz

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

thanks

pics on thease parts plz

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

thanks

Will try to get pics over the next week

hey mate do you have the drivers side coin cup thingy that goes in the plastic part of the arm rest?

Yes, but it's cracked at the bottom where it screws in

  • 2 weeks later...

hey you big lazy bastard, lol.

I'll take the Flywheel and Oil cooler kit.

Conditions: I need the specs on the flywheel, and pictures please. Will pay cash, and arrange pickup.

hey you big lazy bastard, lol.

I'll take the Flywheel and Oil cooler kit.

Conditions: I need the specs on the flywheel, and pictures please. Will pay cash, and arrange pickup.

Oil cooler kit is sold

Ill get details on the flywheel next week when I get it off the car

mate do you have the interior for the boot, it is a sedan isnt it

It's a coupe, yes i have the boot lining

how much would u do turbo manifold gate and dump for? keenskies :P

the manifold and gate are spoken for at the moment

Turbo price is firm

Extremely Lazy Bastard, I'd also like to take the injectors.

Thanks.

Gone sorry.

I'll do a quick edit of whats still available

Parting out a complete series 1 R33 GTST

If a part you are after isn't listed, just ask.

Parts are located in Ipswich, QLD

Postage not included - buyer to arrange own post for large items

PM, Post or text 0414 249 292 (only call after 6pm)

Engine/Driveline stuff

RB25det - complete engine with all ancilliaries - $1250 (has HKS cam gear, polished CAS and polished cam covers)

Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600

Garrett GT3582R exhaust housing, .82 - $250

Jun "style" inlet manifold, still over $800 new on ebay - $600

BMI 86mm billet throttle body - $250

Deatschwerks 740cc injectors (straight fit in factory rail) - SOLD

SARD FPR, with gauge and adaptor for factory rail - SOLD

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - SOLD

Performance-wise Oil cooler and filter relocation kit - SOLD

MSpec aluminium radiator, pretty sure it's 45mm - $200

KTS Intercooler, 600x300x100, 3" in and out - $200

FMIC, 600x300x70,3" in and out, BRAND NEW - $150

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250 ON HOLD

Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - $350 - ON HOLD

Excedy twin plate clutch, plenty of meat left - $1000

Lightweight chromoly flywheel, good condition - $250

RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000

5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250

Splitfire coil packs, perfect working order - SOLD

JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - SOLD

Turbosmart Type 2 plumb-back BOV - $150 - ON HOLD

R33 non ABS diff, shimmed a few years ago, still nice and tight - $100

Suspension/Brakes

Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000

Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350

Adjstable Rear upper camber arms - $100 - ON HOLD

HICAS lock bar - $50 - ON HOLD

Front adjustable castor arms - $100

Front strut bar, polished - $100

Rear strut bar, factory - SOLD

Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - $300 - ON HOLD

Rear brakes, stock - $150

Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - $1000

Electronics

Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - $1000

Blitz dual SBC EBC, the older black one, dual solenoid good working order - $250

NISMO clear side winkers - $50

Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three

Pioneer CD/MP3 headunit, basic model, black, removable face - $50

Jaycar response 4ch amp - $100

Fusion 12" sub in box- $50

Body & Interior

Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400

NISMO GT shift knob, excellent condition - SOLD

Series 2 steering wheel, very good condition - $150

Series 1 headlights, sedan model with silver inserts, excellent condition - $300

Rear lights, black - $50

Series 2 rear wing, black, with boot - $100

Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - SOLD

Type M side skirts, good condition - $150

400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150

Type M rear pods, black, good condition - $80

Series 1 dash surround, very good condition, has been stripped and repainted - $100

Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100

Drivers side window switch panel - $100

Series 2 seats, front and rear, drivers side has tear in bolster - $50

Interior carpet and boot trim - $60 - ON HOLD

Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40

More to come as I think of it

Reasonable offers considered but lowballers will be ignored

Pics to follow

Gone sorry.

I'll do a quick edit of whats still available

blah, you lazy bastard

haha

Thanks for letting me know

How soon can you get me the specs on the flywheel? Keen to grab asap if the right specs. Can you remember where you got it from, or the model etc?

blah, you lazy bastard

haha

Thanks for letting me know

How soon can you get me the specs on the flywheel? Keen to grab asap if the right specs. Can you remember where you got it from, or the model etc?

It came with the twin plate, both of which I bought second hand, so I have no details on it at all

It should be off by next wednesday so I'll weigh it and get some pics for you



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...