Jump to content
SAU Community

Recommended Posts

Was talking to a friend who recently had some HID lights installed. He was going on about how much better they are than standard lights and so on. I don't know a lot about them, but he said he's one are 8000k, and to be honest they are really bright.

He said you can get lower brightness, so I was wondering if anyone here has them in their stag, what brightness they have and are they worth the upgrade?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/315215-hid-lights/
Share on other sites

i just ordered some new globes for my xenons, i think they are 6000k, which i am lead to believe is pretty close to the standard ones, which light up nicely

Standard i believe is 4300k..don't quote that though. I have the standard ones in my car and they do do a much better job then halogens IMO. I also just bought some 6000k bulbs however...Not sure how long the HID ballast's will last.

Link to comment
https://www.sau.com.au/forums/topic/315215-hid-lights/#findComment-5164853
Share on other sites

just a thought on the super bright lights. while they may be awesome for you to see that little bit further than the stock(fairly good ones) they are actually kinda blinding when coming the other way, especially when you're on a motor bike or out in the country. 8000k is probably a bit overkill, as well as being another thing for cops to pick on.

Link to comment
https://www.sau.com.au/forums/topic/315215-hid-lights/#findComment-5164866
Share on other sites

Im not 100% sure on other states but a (QLD)Department of Transport officer told me that 6000k is the maximum legal limit in QLD as 8000k is a blue shade.

Ive previously had 6000k in another car and in my partners car. 1000x THUMBS UP! Compared to factory bulbs, the factory lights were like candles.

On a stupid note, I have seen videos of 75,000k HIDs... Id imagine it would start melting stuff. :S

Link to comment
https://www.sau.com.au/forums/topic/315215-hid-lights/#findComment-5165002
Share on other sites

The bulbs brightness then..how is that measured haha? Is it the wattage of the bulb? Ie, Will a 50W bulb be brighter/ shine further then a 35w bulb?

yup, stocks are 35W 12v xenon's, but you can get 50W (or 55W) replacements = more light

Link to comment
https://www.sau.com.au/forums/topic/315215-hid-lights/#findComment-5165735
Share on other sites

lumens (spelling??) is the measure for light. but yer as pipster said. most of the info on the packet will have lumens on it. i have only seen a few cheaper bulbs that didnt have lumens. but just remember if you go too high in the kelvin scale your light will deminish, i went for the 10000k simply because of the colour and i regret it now that i work night shift as driving down a dark nighway at 130 in the morning i need to use the high beams just too see further then 80-100m clearly. although all road side signs do light up very clearly for upto a few hundred meters.

Link to comment
https://www.sau.com.au/forums/topic/315215-hid-lights/#findComment-5166911
Share on other sites

I have the factory HID lights on my V35, but in my opinion, the standard Hlogens in my C34 are better: maybe it has to do with design of the lens etc, but IMO the HIDs are better for the first 20m or so, but the Halos are clearer for a much greater distance... For the record, I have no intention at all of changing my C34 lights to HID: I simply get ultrawhite globes or similar...

Link to comment
https://www.sau.com.au/forums/topic/315215-hid-lights/#findComment-5167133
Share on other sites

I have the factory HID lights on my V35, but in my opinion, the standard Hlogens in my C34 are better: maybe it has to do with design of the lens etc, but IMO the HIDs are better for the first 20m or so, but the Halos are clearer for a much greater distance... For the record, I have no intention at all of changing my C34 lights to HID: I simply get ultrawhite globes or similar...

It wasn't that I found my headlights dim or any problems with them at all. They do a great job. It was wondering could there be a better option? After reading everyone's opinions, I'll stick with what I have.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/315215-hid-lights/#findComment-5167601
Share on other sites

  • 3 weeks later...

I put 35w 6000k in my S1 and the difference is astronomical.

They are ridiculously easy to install, prove much better light and I dont get 'flashed' for having bright lights.

Ive even had cops pore over my car and hey were cool with it.

Ebay is your friend on this one, for a S1 at least make dure you get the High/Low ones, since the same ballast will serve your high beams too.

A separarate ballast will be needed for the foggies, and look into some LED parker bulbs just to colour match

Link to comment
https://www.sau.com.au/forums/topic/315215-hid-lights/#findComment-5202464
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...