Jump to content
SAU Community

Recommended Posts

Hello guys,

though i will get luck by simply cleaning the window motor, so i took it apart and well after cleaning it ... still very temperamental.

Now i want to replace it... where do i get one...

I found this one on ebay US for around $280... see link below

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...tem=#vi-content

what are the other places to get it from, anyone can recommend a Nissan dealer in this side of brisbane to call and ask for a price

also what is the Part number to ask for............ ? and i hear price vary widely from dealer to dealer... so if anyone can recommend a place would be great....

Thank you in advance

I followed the below video for door trim removal and it was very easy to do, specially when you have someone to share the load....

http://infinitihelp.com/diy/gcoupe/project...t_procedure.htm

kushil,

give me a bell and I'll get you one. should work out a bit cheaper than the above quote.

Thanks Chris

I order it from US for $245, since it's weekend drive delivery time is not such a big issue

I see your a lot closer to get to now with the new workshop, so this is the place to find you now ??..

Hate these nagging issue in the V with electrics and electronics

i got the speaker issue, but was fixed by Mr Rogers along with the iPod integration, i also put in an earthing kit as well and has made a difference

The Window issue i though i could manager my self as the removal / Fitting steps are not that hard

i need to get my head around the re-setting of Window motor to let it "KNOW" where to stop when closing the window.... !!!

Thanks Chris

I order it from US for $245, since it's weekend drive delivery time is not such a big issue

I see your a lot closer to get to now with the new workshop, so this is the place to find you now ??..

yep. here 5 1/2 days a week and its 3 times the size of the old place.

Just though i would give an update

got the motor from River Side Infinity

Fixed it and works NIcely

I had some trouble with MOTOR RESET, function... but after a bit of fiddling with Motor Reset black nob , is working all good now

do you need the regulator as well when replacing motor? or are the two doesn't have to be related?

The whole assembly comes with it Rionto, not just the motor

dont know if you can just buy the motor to be honest

I would thought so they can be bought separately....

Especially looking at that scanned receipt, the regulator comes ex. Japan, and the motor assembly comes ex. WA...

LOL...

needs a lot of very large ID-4 style UFOs to ship a one-piece assembly that spans from Perth to Tokyo...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...