Couple Of Questions For The R33 Gts T Series One

[danny14]

hey guys currently running gts link with 2 bar three wire map sensor(12v red,white-sense,black -earth) i want to know whether my map sensor is stuffed or the ecu is crook. should sensor fluxuate between .4 v and 2 volts at idle sitting still and when not running with ignition on shows 1.79 volts is this right or wrong wat happens when u snap boost it fully breaks down and leans right out, i changed coils to yellow jackets and since that this has happened . i have checked everything wiring harness everything !!!

when i run standard comp with air flow metre it doesnt miss a beat

also does the r33 gts t series one run a iat sensor ?

can someone please help me pulling my hair out !!!!

[SECURITY]

have you got the software? if so connect it up and see if the pressure changes when you snap the throttle. i had the same issue on my vipec where the vac hose closed up on itself and would not change pressure and would lean out and turn off once throttle is opened.