Jump to content
SAU Community

Recommended Posts

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

OK need to pay for my new ecu n tune so i need as much of this gone asap

also

Series 2 coilpacks for rb25det $110ono

rb20det coilpacks $70

hello, id be keen on coil pack loom if good,./ injector/injectors../coils packs/ turbo/?

hey mate i only have the coilpacks in ur list sorry, might have the inj loom but yea if ur keen pm me or gimmie a txt if u can pm

bump

the block is on hold atm but the head is still attached, will knw by around monday arvo if its sold or not.

the guy hasnt gotten back to me yet so i assume his not wanting it so the block is still avail (with head still attached)

will swap for slotted front rotors for r33 gtst maybe cash adjustment depending on what you want

some items will post for free depending on what you want

Hey mate, will you sell the throttle body seperate from the manifold?

hey mate i prob wont want to separate it would like to keep it whole in case someone wants the whole thing.

any idea what the clutch is rated to?

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50 SOLD

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110 SOLD

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

RB25DET series 2 AFM: vgc $100

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

thats alright mate no probs, ur prob better getting a twin plate for that power to be safe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...