Jump to content
SAU Community

Recommended Posts

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

OK need to pay for my new ecu n tune so i need as much of this gone asap

also

Series 2 coilpacks for rb25det $110ono

rb20det coilpacks $70

hello, id be keen on coil pack loom if good,./ injector/injectors../coils packs/ turbo/?

hey mate i only have the coilpacks in ur list sorry, might have the inj loom but yea if ur keen pm me or gimmie a txt if u can pm

bump

the block is on hold atm but the head is still attached, will knw by around monday arvo if its sold or not.

the guy hasnt gotten back to me yet so i assume his not wanting it so the block is still avail (with head still attached)

will swap for slotted front rotors for r33 gtst maybe cash adjustment depending on what you want

some items will post for free depending on what you want

Hey mate, will you sell the throttle body seperate from the manifold?

hey mate i prob wont want to separate it would like to keep it whole in case someone wants the whole thing.

any idea what the clutch is rated to?

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50 SOLD

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110 SOLD

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

RB25DET series 2 AFM: vgc $100

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

thats alright mate no probs, ur prob better getting a twin plate for that power to be safe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...