Jump to content
SAU Community

R33 Gtr Series 1 And 3

Brandon
 Share

Recommended Posts

Brandon Veteran

Brandon

Posted
Posted

G'day Guys,

Anyone know if they're direct fit? I've got the series 1 dash cluster and steering wheel. Reason for changin is simple because of airbag. If the airbag doesnt work if you swap them, I wouldnt be doing it. Thanks in advance.

Brandon

Link to comment
https://www.sau.com.au/forums/topic/317034-r33-gtr-series-1-and-3/
Share on other sites
some_cs_student Veteran

some_cs_student

Posted
Posted

This probably doesn't help, but I'd just point out that series 2 and series 3 dash are identical, the steering wheel only has different stitching on it in series 3, oh, there is a light switch under the dash (LHS under steering wheel) for the fog light switch on the rear in a series 3....but its tucked away :cool:

They're are a lot more series 2 owners than series 3...

bambinator Enthusiast

bambinator

Posted
Posted

If what you're asking is "can I fit a later series wheel to an S1 R33 GT-R?" then the answer is yes. The S1 wheel (single airbag model) has the airbag computer behind the airbag, in the steering wheel. This computer needs to be removed from the S1 wheel and attached to the S2/S3 wheel, after which the wheel will go on the car and the airbag will plug in. The airbag light will not be on, which seems to indicate that the system is working OK, but the only way to know for sure is to crash the car or trigger the sensor. I'm not ready to do this yet, so I can't guarantee you that the airbag "works". You will also need to fiddle with the horn wires a little, but it's a piece of cake.

The dash clusters (with the dials in them) are the same between models, no reason to change.

If you want to fit a twin-airbag dash to a single-airbag car, it can be done, but there is a LOT of work involved. Some guy in Germany did it and wrote it up on GTROC.co.uk, but it's quite involved - you need to buy a new computer, the airbags, dash, under-dash bracing, etc etc the list goes on.

Brandon Veteran

Brandon

Posted
  • Author
Posted

f**k that shit. Too much mucking about for the 2 airbag and since I've found the solution to the other problem I have, I think I'll stick with my fat steering wheel for now.

http://www.skylinesaustralia.com/forums/Wh...-N-t293221.html

Thanks for all the reply guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Chickos Cruise

      By Matt Z · Posted

      Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • MBS206
      "Cheap" bolt on turbo on RB25DET NEO

      By MBS206 · Posted

      It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • MBS206
      Strange issue RB25DET wont start

      By MBS206 · Posted

      What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...