Jump to content
SAU Community

Recommended Posts

rTook my car to hidden vally drag strip on friday night.

Did a best of 15.343 @ 90mph/ weather was 32dec and 98% humidity/

car is running a catback exhaust and pod and is auto.

just wondering if this is the time i should be looking at or should i be going faster?

Edited by redliningr31 skyline
Link to comment
https://www.sau.com.au/forums/topic/317155-drag-times/
Share on other sites

how are your launching the auto? i wont recommending doing it too often as it will causing premature failure of the gearbox if done too much, but u should try stalling it up (hold the brakes and hit the rpm up to about 3000) just b4 take off.

Link to comment
https://www.sau.com.au/forums/topic/317155-drag-times/#findComment-5194793
Share on other sites

how are your launching the auto? i wont recommending doing it too often as it will causing premature failure of the gearbox if done too much, but u should try stalling it up (hold the brakes and hit the rpm up to about 3000) just b4 take off.

First run was just stomp on the gas did a 16.1 for that

2nd got it up to 5000rpm in 'n' and droped it (Still had tyer pressure at 36 psi= wheel spin 1st 1/2 way in 2nd)

3rd was at 4000rpm tyers at 30psi and she did a 15.3

from there on i just played with the revs.

I would rather not do the way mentiond as i managed to blow my r31 auto box like that after 15 runs.

Link to comment
https://www.sau.com.au/forums/topic/317155-drag-times/#findComment-5200445
Share on other sites

yeah that is probably worse then i mentioned. next time as the lights start from the top of the tree, have it in D, hold the brake and hit the gas to bring it to say 4000rpm (play with it to get good launches) then release the brake and hit full throttle.

Link to comment
https://www.sau.com.au/forums/topic/317155-drag-times/#findComment-5200709
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...