Jump to content
SAU Community

Recommended Posts

hi guys, found this from ebay, not sure it will fit my S2 AUTO stagea or not, i know Z32 N62 AFM will fit , but untill i saw this one R71, not sure is from Z32 or not, can someone comfirm for me please. I plan to mody my S2 stagea now, will plan to get bigger turbo and AFM.

post-71852-1271741046_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/317456-afm/
Share on other sites

That's a Subaru STI AFM. Probably won't work...

You'd be wanting either the stock 'Pink' label or a Z32 'green' label.

Note: With the Z32 you MUST have it tuned. It will not run otherwise.

all the Z32's i've seen including mine have an orange label. green label afm's can be found on the S1 RB25's and RB20's.

samkoek, unless you have an SAFC or Nistune or some other kind of aftermarket ecu control, a Z32 will be useless as the stock ecu wont run with it. stock afm should be good till about 200kw-220kw, so just keep that in mind as you might not need a Z32 AFM yet and can spend your coin on something else. also be-careful when buying Z32's on ebay, there are a lot of fake ones floating around that will not work properly. best advice for if your chasing a Z32 for future upgrades would be to either purchase it of one of the site sponsors on this forum, they often have deals going for SAU members. or see if there is a decent second hand one for sale on these forums.

Link to comment
https://www.sau.com.au/forums/topic/317456-afm/#findComment-5190387
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...