Jump to content
SAU Community

Rb26 Split Dumps

endless
 Share

Recommended Posts

endless Proficient

endless

Posted
Posted (edited)

Got a set of split dumps for an RB26 for sale

They are the HKS replica ones as JJR sell (http://justjap.com/store/product.php?productid=16978&cat=0&page=5)

One of them has been modified slightly with a hammer to fit as can be seen in pic - they were removed from an R32 GTR

14cwms9.jpg

$250

Edited by endless
Link to comment
https://www.sau.com.au/forums/topic/317533-rb26-split-dumps/
Share on other sites
endless Proficient

endless

Posted
  • Author
Posted
whats the inside diamater of the outlet ?

60mm

factory location? will this bolt up to an existing front pipe setup without drama on a 32R?

Yes will bolt onto factory turbos as were fitted to N1's. Should fit to factory front pipe without a problem as they are stock replacement dumps.

  • 4 weeks later...
whiteboy01 Collaborator

whiteboy01

Posted
Posted
200 inc post

If anyone worried that the dented part will affect performance - it won't at all as where the split joins - the hole is smaller than the pipe diameter.

Low ball of $100

abit sus of the dent =S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • niZmO_Man
      J50 clock date suddenly reset to January 1

      By niZmO_Man · Posted

      Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • niZmO_Man
      Wheel Sizes & Offsets For Skylines

      By niZmO_Man · Posted

      8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...