Jump to content
SAU Community

Recommended Posts

im not a mechanic, gonna say this right now lol, so i can say some dumb things.

i can and have serviced vehicles before (but never a turbo), but the turbo pipe????(i think haha) running over the engine block baffles me and i did not want to take it off and put it back myself just in case i buggered up. So i took it down to the mechanic for a check up and book in for a service. They want to charge me 440 for a major service using platinum plugs, or 240 using standard plugs, im guessing coppers, but after reading this im not sure if its worth the extra money?

I have an R33 GTST at 84K with stock boost.

The reason for the major service now is that i dont have any paperwork for the car ie. service history.

$200 difference to go with platinum plugs vs coppers eh. I bought my 6 pack of Bosch Platinums for $38 from Super Cheap Auto. And someone mentioned here previously that this week they are $32. The $200 different would only be if they used proper NGK Iridiums or a very expensive platinum plug. Even then you're looking at just over $100 for 6, so they are adding on $80-100 profit just for the plugs.

I'd say change them yourself. It's not that difficult and all you need for tools is a good socket set, extender and spark plug socket.

As far as a major service goes, what are they proposing to actually do? I have a feeling they won't do much judging by the price discrepancy of the sparkies. Probably do things like check all your levels, maybe do an oil change, but again you're better off doing it yourself so you know for sure what's been put in there.

Changing the oil and spark plugs are probably the two simplest services you can do on your car. Well worth a shot and giving it a go.

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

here's the service schedule for an r34, its probably similar for r33/32.

when i was learning what to service a mechanic quoted me $250 for a basic service: oil+filter, air filter and top up of fluids.

to do yourself:

good oil + filter $100 and cleaning your air filter is free!!

major services usually include a coolant flush (prob just radiator though), as well as plugs and a few other minor things ive forgotten. the attachment is much more detailed, i doubt many mechanics would follow it...

R34servicemanual.pdf

As far as a major service goes, what are they proposing to actually do? I have a feeling they won't do much judging by the price discrepancy of the sparkies. Probably do things like check all your levels, maybe do an oil change, but again you're better off doing it yourself so you know for sure what's been put in there.

they were gonna do all fluids, plugs and leads, all filters, all flushes and some other things. i think haha.

got some prices for plugs, bosch platinums 6/78 and champion iridiums 6/150, that was from repco. Might head to supercheap tomorrow before i do anything.

from what i have been reading, the only reason to use platinums is because of their increased life, yeah? other than that it will giuve the same result as coppers?

with all this help ill be able to save myself some significant dough :(

Ah ok, that doesn't sound too bad then wilo. I doubt the coolant flush would have been an extensive one however. To do it properly takes quite a bit of time. If I were to guess, I'd say they would have simply drained the radiator then refilled. Leads? What are they referring to I wonder. We don't have any spark plug leads if that's what they were referring to.

Fluids are easy to check yourself. You have your brake fluid, power steering, transmission if you have an auto, oil, window washer fluid and the main radiator coolant stuff.

Wow that repco price for the Bosch Platinums is near double Super Cheaps Price. Definitely head in SCA and grab a six pack. No matter what store you end up going with the part # is P1-6 (FR7DPX). It's a six pack of plugs sealed in a clear plastic covering.

The copper vs platinums/iridium debate is a forever on going one. If you take out the performance part of it, then it comes down to what lasts longer. And then the consensus is platinums/iridums last longer than coppers. Some people get 5000kms with coppers, some 20,000kms. And some people state they only got 5000kms with their platinums and others got 50,000-80,000kms.

i have no idea what they are referring to then in regards to leads. They usually let me watch and ask questions there, so i might take it to them anyway for the first time and see how they do it and ask my myraid of questions and take it from there!

I'd recommend you take your car to a few other shops and get quotes too. The quote you were given was outrageous. Charging you $200 extra for platinums which you can get for 40 odd dollars yourself is cause for concern. I understand you wanting to learn and ask questions, I just don't think this is the shop for you.

+2 to krazykong, 1: charging an extra 200 is nuts for iridiums, and 2: there aren't leads to each plug as each plug has its own coilpack.

i think some mechanics throw the term "flush" around quite loosely lol. there are diy's for pretty much anything you want to do here in the forums: usually check forced induction/na/gen maintentance stickys, even drivetrain and transmission stickys, and the diy thread. all great info on what to do.

there's nothing like the sense of achievement when you do the job yourself and save many hundreds of dollars :D

Put a set of FR7DPX in mine this morning.

Was running 10psi and it was stuttering like crazy over 4k, Dropped it back to 7psi and now its reving way faster and smoother than it was with the NGK coppers i had in there(coppers were stuttering too @ .9 gap) Tried the coppers at .8 gap and it just seemed to rev really slowly

New coilpacks will fix it i hope.

Personally I think NGK are way overpriced and overrated as well. I recently put a new set of Bosch plugs in my daily and it runs like a dream - stuffed if I am gonna fork out so much cash for Fashion label spark plugs

talked the mechanic into doing it for 300. So i still went with him. He used NGK double platinums????

Goes like a dream! No more stutter, extra peformance ect etc

im still thinking i got a little ripped off, but he also tightened my hand brake, replaced a tyre in the cost.

Personally I think NGK are way overpriced and overrated as well. I recently put a new set of Bosch plugs in my daily and it runs like a dream - stuffed if I am gonna fork out so much cash for Fashion label spark plugs

I'm with you on that I've just changed my plugs NG friken K plats @$126.00 just because I was to friken cowardly to take a punt that the Bosch were good :ermm: What was I thinkin I used Bosch back in the day in shitloads of rides with no probs.

hey kong, how were the bosch's going prior to the coolant issues? interested in getting them myself. sorry to see the coolant probs, hope it works out

The Bosch's are going great. Car feels very good, but as you know from some of my previous posts, I did do quite a few things at once, so I can't then say for sure if the new plugs helped. But let's put it this way, they didn't not help either. And for the price, you're paying for coppers basically and getting platinums.

  • 1 year later...

Don't mean to necro an old thread, but figured it was better than making a new post.

I've had my Bosch Plats out of the car for awhile as I was testing to see if I had a spark or coil pack issue. Issue was car not able to go full power, and doing this hiccuping, spluttering thing. So I gapped my old plugs down to about 0.9 and the car felt better than ever. Last week my AFM died on me and I had to drive it with the AFM disconnected. The plugs fouled of course. I got my replacement AFM today, and at the same time, cleaned and gapped my Bosch Plats down to 0.8. Took it for a drive tonight and my goodness does this car deliver the power now. We'll see how it lasts, but right now the car is humming along nicely.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
×
×
  • Create New...