Jump to content
SAU Community

Recommended Posts

Vehicle:

R32 GTS-T coupe

Motor:

RB25DET Neo (60,000 km)

Blitz return flow cooler (new)

Greddy recirculation valve (new)

High flow Catco catalytic converter (new)

Stock turbo, stock boost controller, stock dump pipe etc

Gearbox:

R34 5 speed manual (60,000 km)

Wheels/Brakes:

Volk GT-C, 18" rears with 235's and 17" fronts with 225's. Front tires near new, rear tires some wear.

R33 GTR Brembo discs and calipers (second hand), new pads, front discs machined, new rear disks

Body:

Full Origin bodykit

M-Spec bodykit included (complete kit, front bar, rear bar, rear pods and skirts)

Respray in Grigio Avalon (gunmetal grey from 2002 Lamborghini)......to me this is the best feature of the car, the colour's just awesome. It's so dark when there's not much light, but then such a bright silver in the full sun.

Clear indicators (Japanese)

35% tint on rear window and quarters

Sunroof

Nismo strut brace front

No brand strut brace rear

Rear spoiler deleted, holes welded up before respray

One minor dent on the edge of the bonnet that the guide coat didn't show up

Interior:

Stock interior with blue dash lights

VDO Boost, Oil pressure and Voltage guages in centre console

Alarm:

Full alarm & Immobiliser system (details will be given to the new owner)

History:

Vehicle was an automatic RB20DET vehicle in 2002 belonging to a chap in the northern suburbs. He decided to do a motor conversion and bought an R34 front cut with 60,000km on it. Put the motor, box, ECU into the 32 then stripped the car for painting. His missus then proceeded to have a baby, so the car sat in his shed till 2008 when I bought it off him. I have been working on it in my shed until two weeks ago when it was finally finished.....only my wife has just had a baby too! Hence why I'm putting it up for sale. I've tried to cart the bub around in it but it's pretty cramped with baby + wife + me, it's not really working.

Vehicle is fully engineered with the motor conversion, has had all the necessary emissions, noise and brake tests and passed them all. It's just been through Regency for a full vehicle inspection (required by Dept. Transport for the engine conversion not because of a defect issued) and it passed Regency except for some bushes needing replacement and the rear steering tie rods have a bit of play in them. It is booked into Ashley at Classic Performance at Hackham next week to get all issues sorted, then a follow up Regency visit. This car has nothing on it that is defectable, every modification has been checked at Regency and approved. Please note, the vehicle will not be actually sold until it has it's final inspection.

The car runs stock boost. I have put about 1500 km on it in the last two weeks since finishing it and I would anticipate another few hundred km before selling. It will be available for sale as soon as Ashley finishes putting the bushes in and it's been through Regency again.

All parts on the car that have brands listed are genuine brands, not copies.

Km on the car are 108,000, but it has the typical misaligned odometer digits which suggests that at some point the mileage has been wound back. I feel confident that the km on the motor/gearbox are legitimate, as it is a 2000 motor and was bought in 2002, 60,000km in two years is quite reasonable.

Please note, test pilots/joyriders will not be tolerated. If you are not a serious buyer don't bother ringing me. If you mistreat the car whilst test driving it you will be reported to the police. Sorry, but that's the way it goes.

Pictures:

See below (please note, the last picture I think I overexposed or something, as the colour's a bit washed out)

If you want any more pictures please just ask!! I am on the computer every couple of days, so can get more pictures up usually within two or three days.

Contact details:

Mob. 0434 924 001

or PM me on here

Price:

$16,000......this does not even remotely cover what I've spent on it in cash and time, but is a fair price for the vehicle.

I may consider a part trade for a cheaper, more family orientated car plus cash my way, but would prefer a straight sale.

post-52798-1272943228_thumb.jpg

post-52798-1272943379_thumb.jpg

post-52798-1272943552_thumb.jpg

post-52798-1272943671_thumb.jpg

post-52798-1272943823_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/319251-r32-gts-t-engineered-rb25det-neo/
Share on other sites

Good luck with the sale mate,be sad to see it go!

Have witnessed this car being built from scratch and the hours of effort gone into it,one of the nicest 32s iv seen, :)

free bump

Good luck with the sale mate,be sad to see it go!

Have witnessed this car being built from scratch and the hours of effort gone into it,one of the nicest 32s iv seen, :)

free bump

Ok so here's my honest opinion with ur car sam!

I think you should keep it and here's my reasons

•it's probably one of the nicest looking 32s in your area,very unique with the kit and your own custom spray job

•even better you have fresh 34 motor and box in it with genuine kms on it and u know it's legit,and since uv done the work with it u know it's history,(simply u have a fresh engine that has boy been thrashed and is reliable)

•I have witnessed your countless hours of work on this car and seen the silent swearing going on inside ur head,but through all this uv produced a very nice car,and because u have done all the work yourself you know it's reliable and you also know it's not just a cheap respray..,if you put the hours of work you have done into a dollar figure is hate to l ow how much ud be loosing and just giving to someone else who probably won't appreciate at it near as much as you

•also from owning 2 32s a s15 and a 34 myself,I can tell you right now if you sell it you are going to want to buy another..sorry but once ya owned one ur always going to want another,as uv witnessed me do..and when you do buy another in a year or twos time ul look back and ask yourself why u gave this away!

•this car has soo much potential!!uv got the basis for so much more with this car,.don't stop now!!it's regency approved,and as you found out u can get almost anything engineered and it's not expensive!why not get this punching out some nice figures over the next few months/years,(I'm about to start on my 34,may aswell do it together,!!

•I could keep going with reasons,but!!!!after picking you up from dropping it off for tuning this morning,and seeing how much u enjoyed it,and the excitement u have to get it back and have it at it's current full potential I think ul agree parting with this is going to be very hard!mate it's a sick car and has a lot of potential still,and even when someone does come to u with the cash,think about the hours uv spent mate!!

Keep it!!!!!!

:P That's a whole heap of good reasons to keep it! Between that and the earful you gave me yesterday about keeping it.......and having my wife, dad, brother, sister, dog, cat etc tell me not to sell it I think I'll take your advice!!

Vehicle is removed from sale folks.

  • 2 weeks later...

I've just had a Nistune ECU and an in-tank Walbro fuel pump put in this and got it tuned up, it's making 193rwkw on 9psi with the most perfect AFR line I've ever seen! Thanks Ashley (Classic Performance, Hackham).

Driven it around for a couple of weeks and it's absolutely mad fun!

BUT........I do need to sell it. I just can't keep it, it just doesn't work with the kid! I need to get a ute for work to free up the family car for my wife, or get another family car for myself.

So the vehicle is relisted for sale

There is NOTHING to spend on this car, it is quick, straight, clean and registered with this motor. All the parts that Regency required to be replaced have been done with brand new parts.

So......buy me! (or at least the car anyway)

I don't have any good pics of the interior or motor but I'll get some this weekend and post them up as soon as I can.

It's just a standard interior, but with a triple gauge cluster where the heater controls used to be. The heater controls have been shifted down to the bottom and the head unit is in the middle. I've taken the cloth inserts off the doors and the back vinyl covers and there is a bit of glue still on there. I was going to put new inserts in but have not done so yet and probably won't before it's sold. The steering wheel is not too bad for a 32 wheel, some of the vinyl is a bit patch but it's pretty good overall.

Oh actually the sound system, I forgot to put those details!

ICE:

Kenwood USB compatible, bluetooth compatible CD player.

Pioneer 6" splits in the front with custom fibreglass tweeter mounts behind the mirror panel, painted the same colour as the car.

Sony 6" speakers in the back.

4 gauge power cable and earth run to the boot, with an anderson plug at the end of it.

I have an amplifier and slimline subwoofer to go in, the speakers are all wired up so they can be plugged either into the amplifier or just run off the head unit. Kinda hard to explain on the net, but it's so I can take the sub/amp out if I want the boot space or the weight gone but still have sound from the speakers.

Here are the interior and engine bay pictures as promised :)

One of the dash lights, one of the centre console, couple of the interior, the custom tweeter mounts and the engine bay (which I noticed needs cleaning badly).

The engine cover has been painted with a combination of silver plus the same grey as the car, as has the strut brace.

I've made the photo's quite small for the sake of a reasonable upload and thread viewing time, but if anyone wants higher resolution pictures please PM me your email address and I'll get them to you.

post-52798-1274651978_thumb.jpg

post-52798-1274651988_thumb.jpg

post-52798-1274652007_thumb.jpg

post-52798-1274652057_thumb.jpg

post-52798-1274652082_thumb.jpg

post-52798-1274652111_thumb.jpg

Hi Jeremy,

Thanks for the offer, I looked at the link and the car looks really nice, however it's probably not any more family friendly than the 32 I already have so I'll pass on it :)

Good luck with finding another 32.

Sparky

After driving the car around as a daily for the last two weeks I have become aware of two things which I need to mention.

1. The speedometer is optimistic, it reads 10% higher than actual speed. I believe this is due to the R34 gearbox/R32 speedometer combination.

2. With a heavy rain some water comes in around the passenger door seal at the top.

Bump and thank you for reading :blush:

  • 2 weeks later...

Couple of important things.

1. Vehicle had it's second inspection at Regency and is now completely passed. The bushes that needed replacing were done and every issue is sorted to Regency satisfaction. The car now has a 'mod plate' inside the door frame to prove the car is registered with the new motor. Additionally the registration papers also have the new motor details on them now.

2. I identified where the water leak was coming from and have fixed it.

Bump!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...