Jump to content
SAU Community

Max boost from HKS 2510

cefiro

By cefiro,
in General Automotive Discussion

 Share

Recommended Posts

GTRman1992 Proficient

GTRman1992

Posted
Posted

The boost isn't a problem if the engine is tuned to handle it. You need the right fuel delivery and timing adjustment to stop the engine destroying itself. This must be set up be a professional. I know of 3 guys who have smoked their engines just playing with the boost alone.

cefiro Experienced

cefiro

Posted
  • Author
Posted

thats on the to do list, get it tuned on the dyno so I am saying that it may have been chipped already but will have to see. I was just worried about pushing the turbo too hard and figured to keep it under 1.1 bar.

but the question really is what kinda boost can I run with the ecu tuned properly.

Cheers Ben

GiJOr33 Experienced

GiJOr33

Posted
Posted

it's a HKS ball bearing turbo. It will probably do 1.7bar easily. HKS turbos are known for having high efficiency ranges, so when it's at 1.5 bar say it works the best. But on a bigger engine you might be trying to put too much exhaust gas through the exhaust housing in the higher revs so the power will drop off.

Give it a go on the dyno... just tune it to what power you want if you have all the support systems to go with it!

When i say whatever power you want i mean that the turbo will allow, a 2510 won't net you 500hp no matter how much boost you screw through it!!!!

cefiro Experienced

cefiro

Posted
  • Author
Posted

Yeah thats good as I can get some more jucie out of it. But as you said I think the key is in the duno and see how things go there. anyone got any suggestions as to where a good place to go is. Silverwater A S, I know are good but maybe a other places would be good just to get some ideas.

Thanks everyone for their input.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Yep will do, thanks for all the help.
    • itsforandres
      BCNR33 Blower Motor Resistor - Testing

      By itsforandres · Posted

      @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...