Jump to content
SAU Community

Recommended Posts

Hi All,

i have a few bits and pieces out of my half cut and out of my gtst shell. everything open to offers.

also stripping half cut so anything u can think off that i havent listed just ask.

Everything out of R32 GTST Type M

will get picks up soon or can email.

Untouched front reo $50

Type M factory side skirt $250, couple of scuffs nothing to major.

3 headlights all mint

2 RH $75ea

1 LH $75

Rear inside side trims (mint) $50pair

Clutch & brake pedal plus clutch pipes (Master&Slave cyclinders leaking) $75 all (can supply new slave for $58)

Dash (mint) $120 with good vents

Climate control unit $20 also have wiring and a/c mode box (offer$$ and il remove)

Instrument cluster $100 (140,xxxkms)

LH lower control arm $50 (ball joint good)

Washer bottle with both motors $25

r33 RB25 crossmember $60

MDU front coilovers $250 base height adjustable, 17 dampner

6 CA18det coilpacks with plugs $50

Located on the sunny coast qld

pm me

Ry

Link to comment
https://www.sau.com.au/forums/topic/320783-r32-bits/
Share on other sites



  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...