Jump to content
SAU Community

Recommended Posts

http://www.skylinesaustralia.com/forums/Po...sp-t194033.html

that should have most of the information you'll need, with brands it best not to go for the cheap fix as they are almost always crap, pay a good price for a good product

Edited by R34 -_-
http://www.skylinesaustralia.com/forums/Po...sp-t194033.html

that should have most of the information you'll need, with brands it best not to go for the cheap fix as they are almost always crap, pay a good price for a good product

cheers bud, doesnt really specify in that post though, i was thinking a nice set of extractors with maybe a 2.25 or 2.5 system with high flow cat and i nice muffler, no cannon, sound anygood?

cheers bud, doesnt really specify in that post though, i was thinking a nice set of extractors with maybe a 2.25 or 2.5 system with high flow cat and i nice muffler, no cannon, sound anygood?

i think anything without a cannon sounds good, lol.

hey guys new to this site, just got myself a N/A 33 and the exhaust is already shitting me, its stock with a cannon, im looking for a increase of performance just wondering wat the best way to go and the best brands and prices if ya can helpme out

Get tuned length extractors, keep your stock cat or get a high flow cat if you can afford the $$$, 2 1/4 piping with whatever nice muffler (normal / high flow) tickles your fancy. That should set you up with a street legal nice system.

I measured my exhaust pipe when i had my cannon replaced and its only 2 1/4inch!! man was i annoyed now i know why my top end isn't that great, bottom end is great tho...

i would go with 2.5inch if i was you, but don't get a huge cannon on the end and if you can afford to, get a straight through resonator put on

I measured my exhaust pipe when i had my cannon replaced and its only 2 1/4inch!! man was i annoyed now i know why my top end isn't that great, bottom end is great tho...

i would go with 2.5inch if i was you, but don't get a huge cannon on the end and if you can afford to, get a straight through resonator put on

thanks for the help. any ideas on the dollars i should be paying for that type of system, just dont wanna get ripped.

thanks bud, how are the coby parts?

ive got coby extractors on mine 2, the seem good so far, higher top end power and more response,

but the factory welds were 2 thick and the shop had to grind 2 of them down a bit to get washers on the bolts , but someone on here said coby has now addressed that issue? and someone also complained that they had the exhaust header flange warp, but it must not have been bolted up right cos its pretty thick, like 6mm

ive got coby extractors on mine 2, the seem good so far, higher top end power and more response,

but the factory welds were 2 thick and the shop had to grind 2 of them down a bit to get washers on the bolts , but someone on here said coby has now addressed that issue? and someone also complained that they had the exhaust header flange warp, but it must not have been bolted up right cos its pretty thick, like 6mm

how much did they set ya back man and where abouts did u find em?

The best sounding exhuast system for a NA skyline would be

DKNE extractors - $500 with HPC coating is what i got mine for....

Custom front pipe and 100cell cat 2.5" - $500 again

Kakimoto Racing Kakimoto R (r33 NA 75mm muffler) - $1000

This is a really quiet setup its about 77dB but you can get it really loud if you ever wanted to buy just removing the intake silencer box in your engine bay. Pretty hefty price for a good exhaust system =\

I got a set of dkne extractors to be put in, just waiting on a varex muffler or cannon (still cant make up my mind to witch one to get, any care to help? PM me) ... quoted 500bucks to get it all installed with a high flow cat and 2.5" mandrel bent piping... Ive been told its a fair price and a good setup...

I got a set of dkne extractors to be put in, just waiting on a varex muffler or cannon (still cant make up my mind to witch one to get, any care to help? PM me) ... quoted 500bucks to get it all installed with a high flow cat and 2.5" mandrel bent piping... Ive been told its a fair price and a good setup...

Thats exactly what i have, its a great setup imo. The varex + highflowcat eliminated 90% of the horrible raspy noise i had with just some random cannon on 2.5inch pipe with dkne extractors. Also have a resonator id recommend one :)

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...