R33 Gtst 4 Door Awd

[KAMAKAZ performance]

hey guys

done a bit of a search but didnt come up with a great deal of info

i have a r33 4 door i am droping a rb26 into and instead of modding the sump and a few other parts, i am running twin hks td05 turbos and the rb25 engine mounts hit the external gates where as the 26 ones dont

so i was thinking if i could use a rb26 running gear

gbox

crossmember

hubs

axles

driveshaft

i would have to check my 2way to see what ratio it is so it matches but would there be any probles with doing this? i would like to keep the abs bit if i cant thats no worries

i would like to use the r32 set up so if can switch between awd and rwd

any tips, ideas or advice from someone who has done it would be sweet

thankyou

Ben

[4drlvr]

Hi mate ive got an rb26dett forged in my 4 door 33 but to run the GTR Running gear as you want the existing tunnell wont fit. You could belt up the tunnell to make the GTR gearbox fit but i didnt go down that path. It was a lot of work the car was off the road for about 4 months, Looms had to be changed to support the twiin turbo setup and twin afms. I ran the r34 gtt gearbox instead of the r33 gtst gearbox.....lost of sideways action but if you find out anyway to get the GTR running gear aka gearbox/ front drive shafts etc let me know coz traction is a problem when you got that much power going to the rear wheels only!!! PM me if need a hand with anything