Jump to content
SAU Community

Recommended Posts

My project has finally come to an end. This vehicle started out as a VQ30DET CVT and soon after its arrival in 2008 the CVT blew up. Rather then spending the quoted 16grand to fix it, I sourced an RB25DET Neo from the same car and began the swap. After countless hours after work and weekends, its finally finished, and the best part is that EVERYTHING works! This is and will most likely remain to be the only RB25DET powered Y34 to be ever in the country (unless someone personal imports one). The reason for sale is simple. I already own another 2 cars and with the arrival of my son, i can only afford 2 sets of rego and insurance and sadly this magnificant car must leave me.

Vehicle details:

2000 Nissan Y34 Cedric

~100,000kms on chassis but ~80,000kms on engine

RWD

RB25DET Neo 4 speed Automatic

Leather and woodgrain interior

19" Work Rims and new tyres

ABS

Quad airbags

Tri-zone climate control

6 stack CD player

FM player converted to OZ frequency

TV with RCA inputs

adjustable reach and tilt steering column

Electric seats front and rear

Electric mirrors

Electric windows

Powersteering

Remote keyless entry with central locking

Xenon headlights and driving lights

Autolock boot

Programable MCU to control auto functions (windows up, lights dim, etc..)

Presidential style window tinting

Air purifier system

New 8inch sub woofer (Stereo ROCKS!)

Steering wheel controls for the MCU (multi control unit)

and HEAPS more

Price - $20,000 ONO

Phone: 0417 366 372

Email: [email protected]

More photos will come, but i ran out of light!

91166154.th.jpg

27150209.th.jpg

43598785.th.jpg

15365906.th.jpg

29996059.th.jpg

15833081.th.jpg

24671679.th.jpg

78865552.th.jpg

41706847.th.jpg

34022544.th.jpg

65324191.th.jpg

63716233.th.jpg

Edited by sbyder
Link to comment
https://www.sau.com.au/forums/topic/321661-nissan-y34-cedric-vip-on-19s/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...